Composition effect on the strength of modified expanded clay lightweight concrete
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 71
Abstract
The effect of modified expanded clay lightweight concrete on its strength is investigated. In the conducted on the optimal plan experiment, the four factors of the composition varied: amount of sulfate-resistant Portland cement from 500 to 600 kg/m3, amount of silica fume from 0 to 40 kg/m3, percentage of gravel in concrete from 650 to 700 l/m3, polypropylene fiber from 0 to 1,2 kg/m3. All mixtures had equal concrete-mix consistency P2, in all mixtures superplasticizer S-3 was introduced in the amount of 0,8%. It was established that the compressive strength of investigated concrete was in the range of 34 to 45 MPa and bending tension strength in the range from 5.8 to 7.2 MPa. The greatest strength of the concrete mix with the amount of silica fume 30-35 kg/m3 and with the content of expanded clay gravel 660-680 l/m3. Due the addition of fiber increases the bending tension strength, while the compressive strength is practically unchanged. Investigated expanded clay lightweight concrete can be recommended for thin-walled constructions of civil buildings also for transport and hydrotechnical floating structures.
Authors and Affiliations
S. O. , Kroviakov, A. V. , Mishutin, O. V. Pishev, V. O. , Kryzhanovskiy
Keywords
Related Articles
- EP ID EP510829
- DOI -
- Views 132
- Downloads 0
Analysis thermomechanical processes in asphalt road layers
The existing practice of design calculation of road pavements demands improvement in methods of temperature change forecasting in each layer considering the actual thermophysical characteristics of materials, and improve...
Normative base of ukraine for the design of bases and foundations of buildings and structures. Modern state and development prospects
The analysis of normative base of Ukraine and an overview of the new state building norms (DBN) and standards (DSTU) for the design of bases and foundations in normal and complicated engineering-geological conditions, de...
Multi-criteria analysis of lightweight monolithic overlappings
The blockouts and inserts in lightweight monolithic overlap setting are being analyzed in the article. The basic idea of using blackouts and inserts is reducing the mass of the construction through the removal of its con...
Calculation of flat bottom tanks, as shells of rotating rigidity rotation
This article includes actions for definition internal forces and moments of thin-walled circular silo for the storage of particulate solids. Wall sheeting of tower silo loaded symmetrical loads. It is assumed, that norma...
Improving the design and calculation methods of precast-monolithic anti-seismic belt of buildings
The article is devoted to seismic resistance of buildings with new precast-monolithic belts. They, unlike monolithic ones, are performed in one cycle together with the laying of floors, without formwork and without inter...