Computational Analysis of Vortex Tube with Different Inlet Shapes
Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 6
Abstract
The vortex tube, also known as the Ranque-Hilsch vortex tube, is a mechanical device that separates a compressed gas into hot and cold streams. The air emerging from the "hot" end can reach temperatures of 200 °C, and the air emerging from the "cold end" can reach -50 °C. It has no moving parts. This study is aimed towards presenting the CFD analysis of vortex tube carried out to gain an understanding about influence of different inlet shapes on its performance are compared and analyzed while other geometrical parameters are held constant. The energy separation has been observed for five different inlet shapes and air as working fluid.
Authors and Affiliations
Mr. Feizal Fidus, Mr. Reji Mathew, Mr. Nidhin A R, Mr. Swagath V Mohan, Mr. Jinu Chandran
Reducing the Test Data Volume by Enhanced Compression Code
Because of the increased design complexity and advanced fabrication technologies, number of tests and corresponding test data volume increases rapidly. As the large size of test data volume is becoming one of the major p...
An Analysis of Credibility of Content on Twitter
We analyze the information credibility of news propagated through Twitter, a popular microblogging service. Previous research has shown that most of the messages posted on Twitter are truthful, but the service is also us...
Studies on Properties of Al-Sic MMCs for Making Valves for Automobile Components - A Technical Review
Material science and Engineering has experienced a tremendous growth in the field of micron and Nano composites developed with enhanced chemical, mechanical and physical properties. Aluminum based Metal matrix composites...
Parametric Study of Various Bracing Systems in Steel Structures
This study is basically concentrated on use of bracings in steel buildings. Here many parameters like bending moment, axial force, joint displacement, utility ratio etc. will be assessed under lateral loads generated fro...
Design and Implementation of Low Cost Automatic Toll Collection System using RFID
Manual toll systems in India are found everywhere at present. This paper focuses on an Electronic Toll Collection (ETC) system using radio frequency identification (RFID) technology. The main goal is to accomplish the co...