Construction Scheme and Influence Analysis of Shallow-Buried Large Diameter Steel Pipe Curtain
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 12
Abstract
[Objective] The construction of shallow-buried pipe curtain structure may disturb the stratum and cause ground deformation. Therefore, it is necessary to study the influence of pipe curtain structure jacking sequence on land subsidence in order to reduce the disturbance of soft soil stratum caused by the jacking of pipe curtain groups. [Method] Taking the shallow-buried tunnel section of Luzhou Avenue in Hefei City as an example, the land subsidence caused by steel pipe curtain jacking construction is monitored; combined with the finite difference model, the influence of the steel pipe curtain jacking sequence on land subsidence is analyzed. Based on the monitoring data, the actual jacking conditions and the finite difference model, the differential effects of different steel pipe curtain jacking construction schemes on ground deformation are analyzed, and the steel pipe jacking sequence is optimized. [Result & Conclusion] Compared with steel pipes of the upper row, the jacking construction of the lower row steel pipes has a greater impact on land subsidence. Therefore, the jacking construction scheme for the overall steel pipe curtain should first jack the upper row of steel pipes, then the vertical steel pipes on both sides, and finally the lower row of steel pipes; while the jacking construction of the transverse steel pipes should start from the middle, and then jack the steel pipes alternately in sequence; the vertical steel pipes on both sides should be jacked from top to bottom, and the steel pipes at the same level should be jacked simultaneously.
Authors and Affiliations
Qihu YUAN, Yebin WANG, Xingqi ZHANG, Xin’an YANG, Luheng LI, Zhaohanqing LI
Flood Control Design and Monitoring Schemes for Urban Rail Transit Vehicle Base
[Objective] Flood control in urban rail transit vehicle base affects its safety and the main line operation. To effectively improve the flood control capacity of the vehicle base, it is necessary to study the key points...
Optimization of Grouting Reinforcement Mass Parameters for Shield Under-passing Buildings in Sandy Stratum
Objective Grouting reinforcement is a common measure to reduce disturbance on existing buildings during tunnel construction. It is essential to focus on the design of GRM (grouting reinforcement mass) parameters in the e...
Flexural Performance of Mortise-tenon Prestressed Bolt Joints in Prefabricated Station Structure
Objective The rationality of joint structures is crucial for station safety. Therefore, it is necessary to study the enhancement effect of additional prestressing measures on the flexural performance of prefabricated sta...
Layout Design of Passive Balise in Platform Trackside under CBTC System of Urban Rail Transit
[Objective] The number and installation location of balises directly affect the line safety, operation efficiency, and project cost of urban rail transit. Therefore, it is necessary to study the design scheme of the bali...
Failure Cause Analysis and Optimization Design of the Transmission Shaft for Guideway Rubber-tyred Vehicle
[Objective] The structural reliability of the transmission shaft of guideway rubber-tyred train is crucial to the safety of train operation. During the ice and snow test on a certain urban rail transit line, the guideway...