Conversion Conditions for Fixed Temperature Difference with Variable Water Supply Temperature and Large Temperature Difference Control Strategies in Urban Rail Transit Station Air-conditioning Chilled Water System
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 8
Abstract
Objective To achieve the lowest overall energy consumption of urban rail transit station air-conditioning chilled water system under both fixed temperature difference with variable water supply temperature and large temperature difference conditions, it is necessary to study the conversion conditions between these two control strategies. Method Taking an urban rail transit station in Zhengzhou City as example, a model of air-conditioning chilled water system under the above two conditions is established using TRNSYS (transient system simulation tool) platform. Under the premise of maintaining the required cooling capacity at the terminal end of air-conditioning chilled water system, the impact on system energy consumption is studied in scenarios of a constant chilled water temperature difference with variable water supply temperature (7-12 ℃), and a constant water supply temperature with variable water supply-return temperature difference (5-10 ℃). Result & Conclusion The conversion conditions between the two control strategies are as follows: when the load rate is less than or equal to 40%, the fixed temperature difference with variable water supply temperature control strategy is more energy-efficient; when the load rate exceeds 50%, the large temperature difference control strategy is more suitable. These conversion conditions not only meet the comfort requirements of station personnel, but also achieve the goal of combined control strategy regulation, ultimately reducing the overall energy consumption of air-conditioning chilled water system.
Authors and Affiliations
Sanxian XIA, Shaochen ZHANG, Weizhi YU, Jie LAN, Dasi HE
Keywords
Related Articles
- EP ID EP742716
- DOI 10.16037/j.1007-869x.2024.08.045
- Views 59
- Downloads 0
Research on Typical Faults and Optimization Solutions for Metro Train Logic Control Units
［Objective］ As a replacement for relays, LCUs (logic control unit) are widely used in urban rail transit trains in China, participating in vehicle control alongside train networks and hardwired signals. Analyzing typic...
Mechanical Response Analysis of Mainline Tunnel Structures in the Full Process of Metro Shield Interval Connecting Passage Mechanical Construction
［Objective］ The mechanical method construction of connecting passages significantly impacts the internal forces within the segment structures of metro mainline tunnels. It is essential to understand the force variation...
Research on the Integrated Detection Host System of Urban Rail Transit Trains
［Objective］ In order to ensure the safe operation of urban rail transit, meet the detection requirements of track obstacles and key components such as pantograph-catenary, running gear and track, and solve problems of...
Causes and Countermeasures of Train Emergency Braking Failures under DRB Turn-back Mode on Xi’an Metro Line 14
Objective Under the DRB (driverless return button) mode on Xi’an Metro Line 14, the train emergency braking will occur after the train automatically switching its head car on the turn-back line, resulting in the train tu...
Study on influence of construction sequence of Pile-Beam-Arch station pilot tunnels on surface settlement
Objective During construction of PBA(pile-beam-arch) method stations, land subsidence is greatly affected by the guiding hole excavation sequence. In order to effectively control land subsidence, it is necessary to study...