Corrosion Behavior of Some Materials in 0.5M Ammonium Hydroxide Solution
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 3
Abstract
The present work has the purpose of studying metallographic aspects and corrosion resistance of three materials used in ammonia stripping plants. The corrosion process was evaluated by gravimetric tests and potentiodynamic method. Materials tested were Al 1050 (99.5%Al), stainless steel AISI 316Ti and low alloy steel P235TR2. To determine gravimetrically the rate of penetration, samples were immersed in corrosive environment for 294 days and weighed periodically. As test solution 0.5 M ammonium hydroxide (specific for coke industry) was used in a three electrode open cell with material tested as working electrode (WE), a platinum electrode as counter electrode (CE) and an Ag/AgCl electrode as reference electrode (RE).
Authors and Affiliations
Gina ISTRATE, Florentina POTECAŞU, Vasile BAŞLIU
Keywords
Related Articles
- EP ID EP596095
- DOI -
- Views 74
- Downloads 0
Effect of ZnO Nanoparticles on the Anticorrosion Properties of Epoxy Coating
Homogeneous epoxy coating obtained by embedding ZnO nanoparticles (≤50 nm) in the epoxy matrix, was applied on Grade A naval steel substrates by dipcoating method. The morphology and microstructure of the coatings were c...
A New Configuration for Cast Bearing Support from the Work Roll as Part of a Thick Sheet Rolling Mill
In this work is made an optimization of configuration for casting bearing support of backup rolls, with Finite Element Method. This program is used for configuration of parts or subassemblies realized from cast iron. The...
Corrosion Behavior of Zinc Alloy Layers
The alloying of zinc with some additional elements in specific quantities could be reliably used in the hot-dip coating process. These elements conferr substantially improved performance to the end-product specially by i...
Evaluation of the Occupational Risk Associated to Work Environment In Ferrous Metallurgy
Work environment present risk factors due to chemical pollution of ambient air with dust, smoke, fumes, vapors, mists and gases. Moreover physical risk factors (related to noise, lighting, temperature, vibration, humidit...
Analysis Frequencies of a Vibration-Type Structure Hall
Its main purpose was to identify natural vibration frequencies for a warehouse type structure in order to avoid resonance phenomena of the structure. The analysis is performed using the finite element analysis module of...