Corrosion of Metal-Matrix Composites with Aluminium Alloy Substrate
Journal Title: Tribology in Industry - Year 2010, Vol 32, Issue 1
Abstract
The corrosion behaviour of MMCs with aluminium alloy matrix was presented. The corrosion characteristics of boron-, graphite-, silicon carbide-, alumina- and mica- reinforced aluminium MMCs were reviewed. The reinforcing phase influence on MMCs corrosion rate as well as on various corrosion forms (galvanic, pitting, stress corrosion cracking, corrosion fatique, tribocorrosion) was discussed. Some corrosion protection methods of aluminium based MMCs were described.
Authors and Affiliations
B. BOBIĆ, S. MITROVIĆ, M. BABIĆ, I. BOBIĆ
Keywords
Related Articles
- EP ID EP135111
- DOI -
- Views 125
- Downloads 0
The Factor of Structure and Mechanical Properties in the Production of Critical Fixing Hardware 38XA
Fixing hardware made of carbon, high-carbon, and alloyed wires is one of the widespread critical parts in mechanical engineering. The characteristics of fixtures and fasteners and their performance figures are assessed a...
Improving Efficiency of the Surface Plastic Covering Deformation of Billets from Aluminum Alloys
The current work is an experimental study of a new combined technology based on the plastic deformation. The test specimens and the drawplate used in the experiment possess regular microgeometry surfaces and are respecti...
Wear and Corrosion Resistance of Fe Based Coatings by HVOF Sprayed on Gray Cast-Iron for Automotive Application
In this study, commercially available FeSiNiCr and FeBCr alloy powders were designed with suitable compositions, gas atomized and then coated on gray cast-iron substrate. The microstructures of the feed stock Fe based al...
Mechanical Properties and Corrosion Behaviour of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Bamboo Leaf Ash
The viability of developing low cost – high performance Al matrix hybrid composites with the use of bamboo leaf ash (an agro waste ash) and silicon carbide as complementing reinforcements was investigated. Silicon carbid...
A Short Review on Frictional Contact Stress Distribution in Involute Gears
In this paper, the gear contact evaluation models developed using various methods have been discussed. The new experimental and numerical methods have been presented. The research papers are classified into frictionless...