Creating Integrated System Between Lifecycle Quality Management and Finite Element Analysis to Improve Typical Turbine Blade Design as a Case Study
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 1
Abstract
This article proposes a process to integrate efficiently the Finite Element Analysis in the Quality Life-Cycle Management in order to use the simulation engineering in analyzing and improving the design of one industrial part. In addition, a new flowchart has been created to enter the data resulted from Numerical Analysis using ANSYS code in QLM process for a typical turbine blade (as a case study) to show the practical steps of design validation in digital method. This paper prepares the base to simulate a complex industrial assembly in integrated FEA-QLM process as a future work.
Authors and Affiliations
Haidar AMER
Keywords
Related Articles
- EP ID EP572758
- DOI -
- Views 152
- Downloads 0
Effect of Oxidation on Spectrophotometric and Rheological Parameters of Corn Oil
The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized corn oil. Corn oil was oxidized of the temperatures of 100°...
Problems and Solutions Regarding the Centrifugal Casting of Wire Sheave for Heavy Cranes
The centrifugal casting of wire sheave is a technological method that ensures the important quality requirement, the continuity of the material in the active rolling zone of the sheave. However the centrifugal casting ha...
Premises in the Design of Computational Algorithms for Refining Slags Applied in Ladle Treatment of Steels. Influence of BOF Slag and of Other Sources of Slag
In the design of computational algorithms for refining slags for ladle treatment of steels, the evaluation of contributions of different factors is a definitory step, allowing to evaluate the real posibilities and limita...
Research on Abrasive Wear Behaviour of Laser Cladding Layers With Aluminum Bronze Powders
The paper presents the wear behaviour on rotating disk with abrasive paper of laser cladding layers with aluminum bronze powders compared with steel samples and aluminum bronze classically quenched. The hardness and wear...
Steel Flow Control of Continuous Casted Slabs Using Submerged Entry Nozzle Exchange System for Tundish
In the steel making process, the continuous casting of molten steel is a very important step which involves hi-tech facilities. The flow control is a very important issue that influences the quality of the final products...