Criteria of an Advanced Assessment of the Reclamation Process Products
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 3
Abstract
Reclamation of spent moulding and core sands has been defined as a treatment of used moulding refractory materials, enabling a recovery of at least one of the components - of properties similar to the ones of the fresh component - and its reuse for production of casting moulds and cores. However, at present, there is a lack of a reclaimed material assessment index, which could be applied for each type of moulding sands and reclaims. The most important criteria of the technological assessment of the reclaimed materials, which should be used, in order to determine thereclamation degree of spent moulding sands originated from the most often used foundry echnologies, are presented in the hereby paper.
Authors and Affiliations
J. Dańko, M. Holtzer, R. Dańko
Keywords
Related Articles
- EP ID EP72113
- DOI -
- Views 102
- Downloads 0
Influence of moulding sands grain size on the effectiveness of quality control systems
One of the modern methods of the production optimisation are artificial neural networks. Neural networks owe their popularity to the fact that they constitute convenient tools, which can be applied in an extremely broad...
Total productive maintenance on example of automated foundry lines
Within framework of the presented study one has performed analysis of stoppages in automatic foundry lines operation, and basing on assumptions from complex maintenance system has undertaken himself to develop a service...
Influence of pressure mould material on the durability of coating a thermal and anti-erosion barrier
This study presents the research results of the durability of coating (thermal and anti-erosion barrier) of a mincer cap casting pressure mould. Tests were conducted with the use of an IDRA OL320 pressure machine. Durabi...
Effect of gas corrosion on the character of phase boundaries in Ni3Al / WC composite
In view of quite specific physico-chemical and performance properties, the composite based on an intermetallic Ni3Al compound reinforced with tungsten carbides (WC) was selected for investigations. The said composite is...
Microstructure of hypereutectic Fe-C-V alloys
The study shows the results of examinations of the microstructure of the in-volume-solidifying Fe-C-V alloys containing carbon in a range of 1.53÷3.09% and vanadium in a range of 14.73÷15.71%. All the examined alloys wer...