Influence of pressure mould material on the durability of coating a thermal and anti-erosion barrier
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
This study presents the research results of the durability of coating (thermal and anti-erosion barrier) of a mincer cap casting pressure mould. Tests were conducted with the use of an IDRA OL320 pressure machine. Durability of the mould with TiN coating applied by PVD was analyzed. The geometrical structure of the mould surface was assessed. It was found that the surface roughness and precipitations of metallurgical origin in the mould material, as well as the surface roughness of the coating do not influence the barrier lifespan as much as microcracks on the mould surface do.
Authors and Affiliations
A. W. Orłowicz, M. Mróz, J. Betlej, F. Płoszaj
Keywords
Related Articles
- EP ID EP71718
- DOI -
- Views 74
- Downloads 0
Ultrasonic testing of the hardening kinetics of epoxy resins used for foundry patterns
The study presents the results of investigations on the hardening kinetics of modern pattern materials which, among others, include also epoxy resins. Tests were carried out using a new ultrasonic technique developed by...
Evaluation of Synthetic Gypsum Recovered via Wet Flue-Gas Desulfurization from Electric Power Plants for Use in Foundries
This article investigates possible use of waste gypsum (synthetic), recovered via flue-gas desulfurization from coal-fired electric power plants, in foundries. Energy sector, which in Eastern Europe is mostly composed fr...
Analysis of the Compounds from the BTEX Group, Emitted During Thermal Decomposition of Alkyd Resin
Suitability of the given binding agent for the moulding sands preparation depends on the one hand on the estimation of technological properties of the sand and the mould made of it and the obtained casting quality and on...
Criteria of an Advanced Assessment of the Reclamation Process Products
Reclamation of spent moulding and core sands has been defined as a treatment of used moulding refractory materials, enabling a recovery of at least one of the components - of properties similar to the ones of the fresh c...
Initial assessment of effectiveness of some selected inoculants for grey cast iron
The influence of four inoculants: FeSi75, Zircinoc, Foundry Grade, and Inogen has been determined in the work. The additions have been introduced in the amount of 0,2% into the cast iron exibiting the degree of saturatio...