Crystallographic Features of Nanostructures SnTe on Polyimide
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 1
Abstract
It is done the statistical analysis of crystallographic angles of surface elements of tin telluride films deposited on a substrate of polyimide by open evaporation in a vacuum. Analysis of images obtained by atomic force microscope revealed the influence of technological factors on the features of shape and spatial orientation of surface islands. It is shown that the islands are a dome-shaped with changing the ratio of the width to the lateral diameter. Weak dependence of symmetry islands on the deposition conditions is revealed.
Authors and Affiliations
Ya. P. Saliy
Keywords
Related Articles
- EP ID EP310462
- DOI 10.15330/pcss.16.1.79-82
- Views 70
- Downloads 0
Features of Time Characteristics of Diffusion Properties of Polymer Modified Film Materials for Technical Application
The changes of the oxygen permeability of packings from polymeric film materials intended for prolonged storage of metal products have been investigated. High indexes of initial oxygen permeability were recorded due to i...
Design of Thermoelectric Starting Pre-Heater on Gas Fuel
This paper presents the results of computer simulation of thermoelectric starting pre-heater on liquefied gasfuel for easier starting of vehicle engines under low ambient temperatures. The physical model of the heater is...
Energy Spectrum of Optical Phonons in the Plane Multi-Layer Resonance Tunnel Nanostructure
In the paper, using the dielectric continuum model, we present the investigation of energy spectra of confined and interface optical phonons in the plane multi-layer resonance tunnel nanostructure produced at the base of...
Correlation of Antiwear and Antifriction Properties of Carbon Fiber with Hardness and Roughness of Metal Adjacent Surfaces
Correlations between friction coefficient and intensity of wear of polytetrafluoroethylene – carbon-plastic, derived by CMA-technology, and nature, hardness, roughness (initial and the one that arose in the friction and...
CVD – Composites as Perspective Materials for Interference Optics of an IR Spectrum Range (Review)
The general mechanism of thermal evaporation in vacuum of chalcogenide (oxide) metal − germanium composites is established. Thermodynamic calculations define values of conditional temperatures which are essentially lower...