Current Aspects in the Conception and Performance of Dispatching Manoeuvres in the National Electric Power Transmission System
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2018, Vol 42, Issue 0
Abstract
In this paper, the authors have structured a complete algorithm for calculating the self-excitement of the generating groups in the NPS power plants, a phenomenon that can occur in the operative manoeuvres performed in 220 kV, 400 kV and 750 kV electrical networks. This shows how with simple parameter calculations can be evaluated parameter approximate values for long lines switching regimes, the safety measures to be taken when manoeuvres are appropriately performed and their sequence in order to avoid dangerous overvoltages that would lead to nonadmissible stresses of the energetic equipments. In order to increase the degree of generality of these calculations, the relative size method was used, for which a computational program developed in the Mathcad programming environment was designed. This calculation algorithm was customized for a double-circuit overhead electric line LEA 220 kV case study. Also are presented the practical algorithms for calculating the voltage jump that occurs when connecting and disconnecting the long electric transmission lines from the power system. The overvoltages caused by the switching of these lines are also evaluated. These values must be taken into account by the managerial and operational staff to properly perform and coordinate manoeuvres. For the considered double-circuit overhead power line 220 kV LEA, the calculation algorithms for both no load and under load switching were customized, and two scenarios were studied, namely when the line is not compensated and when the line is compensated by a compensation coil.
Authors and Affiliations
Silvia-Maria Diga, Nicolae Diga, Cristian Bratu, Adelaida - Mihaela Duinea
Keywords
Related Articles
- EP ID EP433049
- DOI -
- Views 116
- Downloads 0
A NEW MODEL FOR AC PLUNGER-TYPE MAGNETS IN STEADY-STATE REGIME
This paper proposes a new model for plunger-type magnets that could be used in SPICE simulations of some complex systems. The model uses a new advanced modeling technique of ferromagnetic cores that was developed in the...
Dynamic State of Low Power Asynchronous Motors in Direct-on-Line Starting
The research opportunity is explained by the results obtained in modelling and simulation of asynchronous motors, in the purpose of increasing their technical and economic performances when they operate in dynamic states...
Simulation of Idle Running Operating Characteristics for Low-Power Asynchronous Motors
The opportunity of this work is backed by the possibility to predetermine the operating characteristics of an asynchronous motor in idle running. This contributes to the realization of a high performance electric drive....
Methods of Automatic Control Applied to a Resistive Furnace for Thermal Treatments
The paper deals with the study of two methods used for the automatic control of the temperature of the parts from inside a resistive furnace for thermal treatment. The furnace was previously projected and simulated, as p...
Application of Two Direct Optimization Methods on a SMES Device by DOE and FEM: Method by Zooms and Method by Slidings of Plans
The Design of Experiments (DOE) applied to electrical systems modeled by the finite element method (FEM) has become a useful strategy to solve many optimization problems. In this paper, two direct optimization...