Cycle Time Reduction Studies in Threading
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Cycle time reduction is one of the critical aspects for achieving successful production of products. Prompt delivery, high quality of products have now become the significant factors for customer satisfaction. The various methods of programming in CNC systems ensure machine ability, but at the same time optimization and increase in productivity are to be enhanced. Various programming methods in manufacturing of threads were studied in this research work. The cycle times of three different work piece materials during the G76 threading cycle were noted. Then, we proposed G92 cycle of threading to reduce the cycle time. The new process enabled variable depth of cut, less number of passes resulting in cycle time and it is easy to use. The work was practically implemented on a CNC lathe machine and the data related to the experiments were recorded. This method was applied to 10 other work pieces, wherein it was noted that for all types of threads manufactured, a considerable amount of time is being saved and the productivity was increased marginally.
Authors and Affiliations
K. PALAKSHA REDDY, DEEPAK KUMAR, R. VENKATRAMAN, V. VISHWESHVAR
Keywords
Related Articles
- EP ID EP347099
- DOI 10.24247/ijmperdapr201816
- Views 70
- Downloads 0
THE PERFORMANCE ANALYSIS OF MATERIAL HANDLING SYSTEMS FOR A LAYOUT WITH DIFFERENT SPEEDS
Flexible manufacturing systems (FMS) are a group of machines most preferably CNC which is coordinated by a common control centre which has the ability to deal with the variety of products. It is a manufacturing system wh...
An Effect of Stress Relieving on the Microstructural and Mechanical Properties of Mg-3Zn-1Cu-0.7Mn/ Al2O3 Composite Synthesized by Powder Metallurgy
A composite based on Mg-3Zn-1Cu-0.7Mn alloy reinforced withAl2O3was synthesized using blend-press-sinter powder metallurgy route and hot extruded at 400oC. The study concentrates on investigating the effectiveness of alu...
AN INVESTIGATION OF OPTICAL QUALITIES OF NICKEL OXIDE THIN FILMS DOPED WITH GOLD NANOPARTICLES BY THERMAL EVAPORATION PROCESS
NiO thin films doped with three distinct convergences of Au nanoparticles (AuNPs) are stored on the glass slide substrates at 440oC by thermal evaporation strategy. The impact of AuNPs on the optical properties of NiO th...
Optimizing Supply Chain in Reverse Logistics
New problems are introduced in reverse logistics by supply chain planning systems, which demand modern approaches. In this study, we have addressed the specific problem of the reverse logistics for EOL (end-of-life) prod...
DESIGN A POSITIONAL ERRORS CORRECTION, FOR ROBOT USING DIFFERENTIAL LOAD CELL TRANSFORMER FEED BACK ABDUL GAFFER .S .M, SATAR HABIB MNAATHR & KADIM KARIM MOHSEN
This paper describes a method for reducing the positioning errors of a robot during a given trajectory by using differential load cell transformer feedback to minimize the mean positioning error of the end-effector along...