DAMAGE DETECTION IN COMPOSITE CYLINDRICAL PANEL BASED ON FORCED VIBRATION ANALYSIS
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2014, Vol 2014, Issue 82
Abstract
The current work is devoted to the damage detecting inside the composite cylindrical panels. The applied method is based on the analysis of the natural vibration and corresponding mode shapes. The analysis is performed with use of finite element method. The internal defect is modeled by the reduction of the composite material stiffness and density in arbitrary chosen elements. In the first step the natural frequencies of the intact structure are computed with use of the modal analysis. Next, the corresponding mode shapes are determined (harmonic analysis) for the damage and intact structure. For the each mode shape the curvature in the longitudinal and circumferential direction are determined. In the location of the damage the change of mode shape curvature are quite different in comparison with intact structure. The proposed method of the damage detecting in the investigated here multilayered cylindrical panel are very sensitive. Even single small flaws with relatively low reduction of the material stiffness as well as its position can be effectively detected and localized.
Authors and Affiliations
Piotr PAJĄK, Marek BARSKI,
Keywords
Related Articles
- EP ID EP126342
- DOI -
- Views 105
- Downloads 0
A METHOD OF LOADING UNIT FORMATION TAKING INTO ACCOUNT MASS, LOAD-BEARING STRENGTH AND SURFACES OF PACKING UNITS
The problem of loading unit formation is computationally complex in nature. This article presents a heuristic algorithm of forming unit loads, which can be applied to unit load arrangement on unit load devices. This meth...
Napawanie regeneracyjne z chłodzeniem mikrojetowym wałów głowicy urabiającej kombajnów chodnikowych
W artykule przeanalizowano wpływ rodzaju drutu spawalniczego na strukturę i twardość powierzchni oraz celowość wprowadzenia do procesu napawania chłodzenia napoiny za pomocą przystawki mikrojetowej. Napoiny zostały wykon...
OCENA STANU TECHNICZNEGO HYDRAULICZNYCH AMORTYZATORÓW TELESKOPOWYCH NA PODSTAWIE ANALIZY SYGNAŁÓW DRGANIOWYCH Z WYKORZYSTANIEM PROCEDURY LINIOWEJ DECYMACJI ORAZ MACIERZY DECYMACJI
W artykule opisano, opracowany przez autora, algorytm obróbki sygnału drganiowego − Macierz Decymacji − oraz wstępne wyniki badań eksperymentalnych, których celem jest ocena stanu technicznego zawieszenia samochodu osobo...
DAMAGES TO TURBINE ENGINE COMPONENTS
This article defines the typical damage to components of turbine engines, highlighting the differences between them and indicating possible causes. The distinction between various types of defects helps to explain the oc...
THE ASSESSMENT OF ACTIONS TAKEN IN EUROTERMINAL IN SŁAWKÓW
The article presents the analysis of actions taken in Centrala Zaopatrzenia Hutnictwa S.A. (Centre for Metallurgy Supply, JSC) – department Euroterminal in Slawkow which aimed at lowering own costs connected with trans-s...