Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft

Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 12

Abstract

The crankshaft is a backbone of internal combustion engine. So the design & analysis is major aspects to get high power transmission & efficiency. The selection of material is an important parameter while designing any mechanical component. The material should be high strength & capacity to absorb the shocks as well as fatigue. The material also have less wear tendency. The crankshaft should be high torque transmitting capacity. So to achieve these objectives high carbon steel are used for design & analysis purpose. This paper gives the idea about analysis as well as proper balancing of weights by using these three materials. The modelling is done by using solid work software & then analysis by using ANSYS software with Finite Element Analysis (FEA) method. The 5 cylinder engine gives the power stroke at 144 degree angle. By addition of counterweights & modified design these odd cylinders are balanced properly. The Finite Element Analysis Method is used to determine stress, strains & deflection at most stressed point which results into failure of shaft. Results obtained from analysis are used during weight optimization. The Shaft is analyzed using static analysis. For absorbing vibrations proper damping material is used to achieve the requirement of safe design. The optimization results into reduction of weight as well as cost. 

Authors and Affiliations

Yogesh S. Khaladkar , Lalit H. Dorik , Gaurav M. Mahajan , Anil V. Fajage

Keywords

Related Articles

 Optimization of a water cooled Submersible motor journal bearing length using CFD

 The journal in case of a water cooled Submersible motor is the bearing surface of the rotor which consists of hard chromed stainless steel material. The bearing consists of a Leaded bronze material (Bronze grade...

 Changing Dynamics of Land Use in Residential Neighbourhood of Vani Vilasa Mohalla¸ Mysore

 Abstract: Large cities have experienced rapid spatial growth because of higher growth rates of urban population. Land is an important resource for spatial expansion and accommodating various activities within the r...

 Load balancing in Content Delivery Networks in Novel Distributed Equilibrium

 In today’s world’s to provide service to netizen’s with good availability of data, content delivery networks (CDNs) must balance requests between servers while assigning clients to closet servers. In this paper, we...

 An Inclusive Analysis on Various Image Enhancement Techniques

Digital Image enhancement is the process of adjusting digital images so that the results are more suitable for display or further image analysis. It provides a multitude of choices for improving the visual qual...

Comparative Studies on Exhaust Emissions from Two Stroke Copper Coated Spark Ignition Engine with Alcohol Blended Gasoline with Catalytic Converter

Experiments were conducted to control the exhaust emissions from four stroke, variable speed, variable compression ratio, single cylinder, spark ignition (SI) engine, with alcohol blended gasoline (80% gasoline, 10% meth...

Download PDF file
  • EP ID EP116497
  • DOI -
  • Views 124
  • Downloads 0

How To Cite

Yogesh S. Khaladkar, Lalit H. Dorik, Gaurav M. Mahajan, Anil V. Fajage (2014). Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft. International Journal of Modern Engineering Research (IJMER), 4(12), 73-77. https://europub.co.uk/articles/-A-116497