Design and Analysis of Wheel Head in Cutter and Tool Grinder
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 5
Abstract
The work is entirely about “Design and Analysis of Wheel Head in Cutter and Tool Grinding Machine “. Wheel Head is a major part of a grinding machine, which consists of Various sectioned components, namely the wheel head, body, spindle, pulley, bearing housing, column, dial, ring etc., in which each component manufacturing process, dimension and applications are notified in the detailed report. Each sectioned part has to be machined, well before the assembly as per requirement and all sectioned components, are needed to be assembled as per the given procedural steps, for the successful running of wheel head. So, the manufacturing procedure and its dimensions, and other precise instruments calculation have to be notified.
Authors and Affiliations
VVS Prasad, C. Labesh Kumar, T. Vanaja, K. Ashok Reddy
Keywords
Related Articles
- EP ID EP245152
- DOI -
- Views 93
- Downloads 0
Recent Advancements in Robot Assisted Lower Limb Rehabilitation Techniques
Lower limb joint injuries are very common and are caused due to several reasons. In many cases, either after surgical procedure or even without it, rehabilitation is a highly important and necessary process. Rehabilitati...
Experimental Investigation of Heat Transfer Characteristics of the Heat Pipe
The rapid development of electronic industries and increasing processing speed of components, decrease the heat transfer surface area. This generates terribly high heat fluxes, leading to massive temperature rises. To re...
Effect of Screen Mesh Wick and Al2o3 Nanofluid Concentration on Circular Heat Pipe Performance
It is a passive heat transfer device that is used to remove the amount of heat from the heat source. The behavior of screen wick and nanofluid to improve the performance of a heat pipe.Al2O3 /DI-water based nanofluid is...
Effect of Alkali Treatment on Tensile/Chemical Properties and Dielectric Strength of Bamboo and Grass Fiber Reinforced Polyester Composites
Bamboo and Grass fiber reinforced polyester hybrid composite material was fabricated using the rule of mixtures. The tensile and chemical properties of this composite were studied. The alkali treatment effect of the bamb...
An Optimization of Process Parameters for Stir Casted Aluminium Metal Matrix Composites to Improve Material Removal Rate
The aim of this effort is to examine the development of stir casting on the aluminum metal matrix composite (MMC). The Taguchi L9 experimental technique is chosen to erect the quantities of machining tests. Abrasive Wate...