Design and Application of Intelligent Completion Device (ICD) in Horizontal Wells, Bouri Oil Field, Libya
Journal Title: Libyan Journal of Engineering Science and Technology - Year 2022, Vol 2, Issue 1
Abstract
An Inflow Control Device (ICD) is choking device installed in the lower completion that is used to equalize the drainage inflow from the reservoir and into the well. This paper aims to study and evaluated the effect of ICD technology in decease water production and improve the productivity index (PI) which have been successfully used in hundreds mature well completion technology. In this work two wells have been selected for the study; Well #1, Well #2. The ICD units are installed at the horizontal sections of these wells in the Bouri oil field. It can be seen that ICD improved the productivity index (PI) by maximizing reservoir contact, minimizing coning by operating at lower drawdown, and increasing overall efficiency. Based on results of the performed calculations to determine the critical flow rate for water & gas coning; the first well are: Qocw = 1004.55 STB/day, Qocg = 958.094 STB/day. The second well are: Qocw = 1132.33 STB/day, Qocg = 1079.97 STB/day and the performed calculations to determine the time breakthrough for water & gas coning shows the time required for water & gas coning to happen in the second well are 629 days for water coning and 659 days for gas coning.The operations and economics strongly support the use of an ICD for better reservoir fluid management. The recommendations of this work and future development were established. Economic analysis is about the process of gathering the economic data required to performing the analysis.
Authors and Affiliations
Mohammed H. Alfadheel1 , Ahmed Abduljalil2 , Abraheem Mohammed2 , Saleh Emhanna2 Adel Zeglam
Geological investigation of the Upper Part of Memouniat FormatioThe Optimum location of Gas Turbine to Improve the Voltage Of Eastern Libyan Networkn in Well I1-NC2, Ghadames Basin.
The voltage stability is very important term in power system stability. This work, study the impact of the connection point of generator to the electrical network on voltage stability. The case study used in this work...
Assessment of Compliance with Good Hygiene and Manufacturing Practice: Case of the Artisanal Chocolate Factory
The present work concerns the investigation of the products of the artisanal chocolate company X (confidentiality reason). At the end of this survey, the company wishes to increase the notoriety of its brand on the whole...
An Experimental Investigation of Various Impacts on the Performance of A Small-Scale Upwind HAWT
The power production by wind turbines usually falls below the theoretical maximum power coefficient of the Betz limit of 59.26%. This is mainly related to the unsteady aerodynamic environment and poor wind turbine de...
Biofuel Utilization for a Sustainable Environment - A Review
This study synthesizes existing literature on biofuel combustion to reduce CO2 emissions and promote a sustainable society. By analyzing previous research, the study extracts valuable ideas for environmental improvement...
Invention and Development New Equation for Calculate the Intensity of Solar Radiation and Compared with the Measured Value by the Pyranometer
Abstract— Identifying closely the solar energy and its uses, importance, and the positive and negative aspects as well as the study of solar radiation and its components including the effect of weather on the intensit...