Design and Efficiency of an Asymmetric Gear
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
Presently, Gears suffer backlash as well as interference and undercutting. These defects can be eliminated by increasing the pressure angle or by increasing the addendum of the matting gear design for many years. In additional alteration, which is very rarely used is to make the gears Asymmetric mesh gear drive, means that larger and smaller pressure angles are applied for the driving side and coast side, respectively. To obtain the effect of the above spur gear, tooth parameters are to be designed and modelled. Later, the pinion and gear in mesh is fabricated.
Authors and Affiliations
V. Balambica, Vishwa Deepak, Sushant Kumar
Keywords
Related Articles
- EP ID EP614221
- DOI 10.24247/ijmperdjun201925
- Views 80
- Downloads 0
Disruptive Trends and Inclination in Passenger Car Segment of Future Indian Automobile Industry
Due to the emergence of economic process and alleviation there's a stiff competition among the auto industries that square measure focusing attention in capturing the Indian markets. Indian automotive trade changing into...
Structural and Droptest Analysis of Helicopter Landing Skids
Landing skids of Helicopter are directly attached to the helicopter structure. These skids should be able to withstand buckling of struts, stresses &strains. So in the current study, we will consider a Composite material...
Crude Oil based Nanofluids Flow on Inclined Wall
In this research work, we investigated the MHD inclined wall over a nonlinear prone stretching/shrinking plate surface on a crude oil based nano fluids flow. Most specifically, the effects of various parameters namely; s...
A COMPREHENSIVE STUDY ON THE SURFACE CHARACTERISTICS OF MICRO ULTRASONIC MACHINED CERAMIC-GLASS MATERIAL
Objectives The main Objetive of this paper is to find the surface characteristics of Ceramic glass machined by ultrasonic machining words. Methods/Statistical Analysis Ultrasonic machining (USM) procedure has for quite...
STATIC STRUCTURAL ANALYSIS OF AN ADVANCED POWER TILLER CHASSIS AND CHISEL PLOUGH
The rapid increase in industrialization and technology has shifted the agriculture sector into themodern era, which also resulted in labor scarcity and rise in investment. In developing countries like India, there are 89...