Design and experimental analysis of pipe in pipe heat exchanger
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2015, Vol 5, Issue 3
Abstract
Pipe in pipe heat exchanger are used in industrial process to recover heat between two process fluids. The project carried out design of pipe in pipe heat exchanger having tube with fin and without fin. The fins were taken in the form of semi-circular type arranged in altenating way with spacing of 50mm.The fins were only provided on the inner tube for creating turbulence of cold water. The number of fin were 18 and its height and thickness 10 and 1.6mm respectively. Experiment were performed for heat exchanger with fins and without fins. The experiment were performed for different flow rates of hot and cold fluid Different parameters like Overall heat transfer,Nusselt number,Convective heat transfer coefficient,Pressure drop,friction factor were obtained and compared for simple inner tube and finned tube.
Authors and Affiliations
Ojha Pramod Kailash , Choudhary Bishwajeet NK , Gajera Umang B , Prajapat Sumit B , Karangiya Gopal A
Keywords
Related Articles
- EP ID EP142707
- DOI -
- Views 123
- Downloads 0
A review of Carbon Nanotube Reinforced Aluminium Composite and Functionally Graded composites as a Future material for Aerospace
Material selection is a very critical issue when it comes to aerospace engineering. Materials should have good qualities like light weight, high strength and corrosion resistance with economic viability. Over the p...
ris Segmentation: a survey
The use of biometric systems has been increasingly encouraged by both government and private entities in order to replace or improve traditional security systems. Iris recognition biometric systems have proved to b...
Diffusion Bonding of Semi-Solid (SSM 356) Cast Aluminum Alloy
A new technique to achieve the globular weld structure of SSM 356 aluminum alloy was conducted. The effect of joining parameters on the microstructure and mechanical properties of diffusion bonding butt joints of s...
A mechanistic study of the initial stage of the sintering of sol-gel derived silica nanoparticles
Abstract: Dried silica gel powders were prepared by acid catalyzed controlled hydrolysis followed by polycondensation of tetraethyl orthosilicate (TEOS) in 1:1 by volume water-alcohol solution. The dried powders we...
Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft
The crankshaft is a backbone of internal combustion engine. So the design & analysis is major aspects to get high power transmission & efficiency. The selection of material is an important parameter whi...