Design and Implementation of New Converter Topology for Electrosurgical Units
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 3
Abstract
Electrosurgery is the process in which high frequency current is applied to human body part for the purpose of surgical operations like cutting, dessication, fulguration etc. While performing electrosurgery, output power from the electrosurgical generator must be kept constant to avoid charring of tissue. This project aims at designing and implementing a converter and controller topology for regulating power by keeping its value within the required power characteristics. The model is designed and initially implemented in MATLAB/SIMULINK by using blocks from Sim Power Systems tool box, then a hardware prototype is built at a frequency of 34kHz.
Authors and Affiliations
Nimitha Gopinath, Praveen Kumar C
Keywords
Related Articles
- EP ID EP388736
- DOI 10.9790/1676-1303015260.
- Views 120
- Downloads 0
Sepic Topology Based High Step-Up Step down Soft Switching Bidirectional DC-DC Converter for Energy Storage Applications
SEPIC topology based bidirectional DC-DC Converter is proposed for interfacing energy storage elements such as batteries & super capacitors with various power systems. This proposed bidirectional DC-DC converter acts as...
Load Shedding Strategy in Electrical Power System Using Under Frequency Relay
Stability of power system can be defined as its property which keeps several parameters in the balanced operating condition when sudden disturbances occur. In the stable operating condition, mechanical power input in the...
A Novelty Stability Of Electrical System Single Machine Based Runge Kutta Orde 4 Method
In electric power systems that serve the load continuously should the voltage and frequency must remain constant, but if there is interference on one of the generators or the rail, then it is undeniable there will be dis...
Design of Large Scale Decentralized Low-Order Robust Control System Stabilizer to Mitigate the Damping of the System
A discrete system is a system with a countable number of states. Discrete systems may be contrasted with continuous systems, which may also be called analog systems. A final discrete system is often modeled with a direct...
Modelling and Control of a Chopper using Feedback and Feedforward Control Schemes
Designing two degree of freedom controller to control the boost chopper system is challenging. A new feedforward combined with feedback controller design is proposed. Increasing the efficiency of the DC-DC converters can...