Design and Implementation of Sensored Brushless DC Motor Control Using dsPIC30F4012 for CW/CCW Bidirectional Rotation

Journal Title: Engineering and Technology Journal - Year 2024, Vol 9, Issue 02

Abstract

This paper presents the development of BLDC (Brushless DC) motor control based on dsPIC30F4012. The system is designed to control motor rotation in clockwise (CW) and counter clockwise (CCW) directions. There are 3 input pins used to facilitate the control interface, namely ground (GND) pin, control (CTRL) pin and enable (EN) pin. An analog input was assigned as command input for rotation in CW/CCW direction. The CTRL pin input has full-scale of analog input that comprises of three regions, namely CCW rotation input (0V~2.4V), CW rotation input (2.6V~5V), and neutral input (2.5±0.1)V as the deadband. The commutation sequences of six steps for direction of motor rotation, while P-I (Proportional-Integral) controller is used to control the motor current. The control law and commutation sequences are implemented in single chip dsPIC30F4012 microcontroller. To verify the system performance, we test the system implementation to drive BLDC motor and measured current are sent to the host PC through serial communication. From the experimental results it is shown that the realizing P-I controller is good performance in small frequency where the bldc motor current can follow the input commands. The bandwidth of motor control to characterize the performance of designed system is also presented.

Authors and Affiliations

Yusie Rizal , Sarifudin,

Keywords

Related Articles

Proposed Improvement of Facility Layout to Optimize Material Handling Costs with ARC, AAD, ARD Approach at PT. Plating Services

In the industrial world, the planning and layout of factory facilities is very important in realizing efficiency and smoothness in work. Improper layout can make material transfer time ineffective because the distance be...

SOLID WASTE TO ENERGY STATUS IN INDIA: A SHORT REVIEW

In recent years managing solid wastes has been one of the burning problems in front of state and local authorities. This is due to scarcity of lands for landfill sites. Thus conversion of solid waste to energy is the bes...

Emotion Detection Using Deep Learning Algorithm

Automatic emotion detection is a key task in human machine interaction,where emotion detection makes system more natural. In this paper, we propose an emotion detection using deep learning algorithm. The proposed algorit...

Design and Construction of Gas Fire Alert System

This research paper aspired to design and develop a gas leakage and fire monitoring and detection alarm system based on SMS. Most fire incidents in houses, schools and factories are caused by gas leakage. Many houses and...

Design and Implementation of a 3D-Printed Robotics Manipulator for Object Detection and Grasping

This paper presents the design and implementation of a 3D-printed robotic manipulator tailored mainly for object detection and grasping. The robot is constructed with PLA material using a known design framework; it is no...

Download PDF file
  • EP ID EP731429
  • DOI 10.47191/etj/v9i02.14
  • Views 57
  • Downloads 0

How To Cite

Yusie Rizal, Sarifudin, (2024). Design and Implementation of Sensored Brushless DC Motor Control Using dsPIC30F4012 for CW/CCW Bidirectional Rotation. Engineering and Technology Journal, 9(02), -. https://europub.co.uk/articles/-A-731429