Design and Manufacturing of Missile Long Shell Component by CNC Turn-Mill Centre
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
The main objective of this paper work is to design and manufacture critical component on CNC TURN MILL CENTRE. In this generation of part programme and implementing the same project consists of various operations that are to be performed to complete machining by maintaining the required dimensional accuracy of the component. It also includes holding devices like fixtures to carry out in the processing. The first stage is process plan for identification of required operations and finalization of sequences to complete the job as per drawing requirements. The second stage involves identification of machine tools and machining parameters, work holding devices, cutting toll and other accessories. The third stage involves materials status at every stage from the initial to final product and finding the optimal method. The final stage involves inspection plan of product with suitable inspection method.
Authors and Affiliations
ALKA SAWALE, MD KHALEEL
Keywords
Related Articles
- EP ID EP278680
- DOI 10.24247/ijmperdfeb20189
- Views 83
- Downloads 0
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...
Effect of Friction Stir Welding Parameters on Impact Strength of the AZ31 Magnesium Alloy Joints
In this experimental work, a study was done to see the effect of Friction stir welding parameters on the impact strength of the welded joints of AZ31 magnesium alloy. The AZ31 magnesium alloy was taken in form of plates...
Optimization of Machining Parameters in Drilling of GFRP(Glass/Vinyl Ester) Composites for Reduction of Delamination Factor
The work reported on GFRP composites was mainly focused on evaluation of favorable machining environment during machining. Moreover, a number of approaches, namely optimization of the operating variables, appropriate sel...
A Comparative Study Between the Successive Screw Displacement and Quaternion Based Methods Used in Forward Kinematics of Serial Robot Manipulator
In this article, we compare two forward kinematic formulation procedures for the 6DoF serial robot manipulator. Both formulation procedures are based on the screw theory. Screw theory based methods are alternative to the...
Processing Fly Ash from the Thermal Power Stations for Gas Emissions Purification from Sulfur Dioxide
The aim of the work is development of technology of adsorptive, catalytical- chemisorptive purification of gas emissions from sulfur dioxide with simultaneous separation of sulfonic acids and sulfoxides as reaction produ...