Optimizing Process Parameters of Nano SiC Reinforced AA6061 Cold Extrusion using Response Surface Method
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
The paper focus on preparation of AA 6061 composites with nanoSiC dispersed at varying weight fractions. AA 6061 billets are extruded by varying extrusion ratio, die included angle, ram speed and %SiC, considering Force required for extrusion, hardness, tensile strength and surface roughness as output responses. Design of experiments based Response Surface Method (RSM) is adopted and 31 experiments are performed as per Central Composite Design (CCD). Empirical mathematical equations are developed for the output responses and Analysis of Variance (ANOVA) is carried out at 95% confidence level. Main effect plots are drawn to understand the variation of input parameters with respect to output responses. Contour plots are drawn to find the most influenced parameter. Surface plots are drawn to identify the optimum input parameters.
Authors and Affiliations
Vijay Kumar. A, Ratnam Ch, Kesava Rao. V. V. S
Keywords
Related Articles
- EP ID EP580580
- DOI 10.24247/ijmperdapr201923
- Views 83
- Downloads 0
Emission Analysis of a DI Diesel Engine Fuelled with Biodiesel from Waste Tallow
In the current investigation ,an effort has been made to make use of tallow oil for biodiesel production. Tallow oil is non- edible oil and now considered as an alternate form of energy. The tallow biodiesel blends B10,...
Evaluation of Mechanical Properties of Steel Fibre Reinforced Concrete with OPC43 and 53 Grades
The various previous research studies have proved that plain concrete possesses low tensile strength, low resistance to cracking and limited ductility. The addition of fibers enhanced various characteristics of concrete,...
The Restoration of Main Turbine Barring Gear Stoppage Issue in Thermal Power Station
Barring gear (or "turning gear") is the mechanism providing to rotate the Turbine Generator shaft at a very low speed after unit stoppages. Once the unit is "tripped" (i.e., the steam inlet valve is closing), the turbine...
Structural Analysis on Composite Laminate with Different Orientation
The aim of the project is to analyze the structural analysis on a composite plate with different orientation, with the same material properties. A composite material consists of two or several material. A composite lamin...
A Methodology and estimation of Film Thickness in Elastohydrodynamic Lubrication
Cam and tappetare always under gigantic stresses which lead to wear and tear of the same. Hence it must be identified, estimated and minimized for prolonged and smooth running of engine. This paper describes an approach...