Design and Optimization of Composite Propeller Shaft
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 2
Abstract
Automotive propeller shaft is a very important component of vehicle. It is used for power transmission from gear box to differential. Conventional steel propeller shafts are usually manufactured in two pieces to increase the fundamental bending natural frequency. But the two-piece steel propeller shaft involves three universal joints, an intermediary thrust bearing and a supporting bracket in its assemblage, which increases the total weight of the vehicle. The overall objective of this project is to design and analyze a composite propeller shaft for power transmission. Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and strength of composite materials. This work deals with the design of propeller shaft for “MAHINDRA LOAD KING” considering the torque capacity, shear stress & critical rpm requirement. In this work Glass/Epoxy is used as composite material for replacement of conventional two-piece steel propeller shafts. The design parameters were optimized with the objective of minimizing the weight of composite propeller shaft.
Authors and Affiliations
More S. D. , Swami M. C.
Keywords
Related Articles
- EP ID EP437879
- DOI 10.9790/1684-1502058389.
- Views 76
- Downloads 0
New Airbag Protection Cover Development of Cell Phone Against Free Fall Using Advanced Finite Element Analysis Approach
Researchers widely used physical testing method toinvestigate the damage of cellular phone during free fall. It is always very costly, time consuming and complex. Finite element analysis is an advanced simulation tools w...
Design, Construction And Performance Evaluation of Earth-To Air Heat Exchanger For Room Heating Applications
Earth air heat exchanger (EAHX) is a subterranean ventilation system that explores soil temperature below the surface to pre-cool or pre-heat ventilation air. Performance of the earth air heat exchanger varies with clima...
Cost, Time, And Quality factors: A case Study of The Rivers monorail Construction Project
Over time, several parameters have been employed to measure the success/failure of construction projects. However, the most common factors employed are Cost, Time and Quality. This research is a case study of the Rivers...
Design of A Cable-locking Device for Cable-driven Manipulators
In this paper, a kind of cable-locking device is proposed, which replaces the motor driving device of the former cable-driving manipulator, and makes the cable-driving manipulator become a passive manipulator which can b...
Behavior of MSE Wall with Strips and Georgics Reinforcement Subjected To Compaction Loadings
This paper focuses on the comparison of the behavior of a panel type MSE wall using the existing geosynthetic strip and steel strip reinforcement with the behavior of a suggested design of panel type MSE wall using wider...