Design and Simulation of a Low-Noise Amplifier (LNA) with low power consumption and high gain in 2.4GHz frequency for wireless systems
Journal Title: روش های هوشمند در صنعت برق - Year 2016, Vol 7, Issue 25
Abstract
This paper presents the design and simulation of low-noise amplifier (LNA) with .18CMOS technology in 2.4GHz frequency addressed, the process HSPICE RF simulation software has been done. Using cascode structure leads to lower power consumption with higher voltage gain and power gain. Matching network was used in the design of this circuit has a very good improves on the parameter S11 and allows to have a good control on the real part of the impedance of circuit by appropriate selection of matching network in input and output. By right choosing of circuit elements in this structure can have an approllllojjpriate compromise among the circuit parameters like noise figure, gain, power and stability to reaching noise figure (NF), input reflection coefficient and low power consumption with high gain. In the 2.4GHz frequency with 1.8V supply voltage and 1.9 mW power consumption, the circuit parameters are: NF=1.21dB, Av=28.dB, S11=-29.25dB, S12=-35.49dB, S21=18.46dB.
Authors and Affiliations
Esmaeel Karimi, Ebrahim Borzabadi
Turn-on Angle Control Using Modified Torque Sharing Function for Torque Ripple Reduction in Switched Reluctance Motors
In the recent years, the use of switched reluctance motors (SRM) in industrial applications has been increased. In this regard, a large amount of research studies have been conducted on controlling the speed and torque o...
A Flexible Multi-Agent Algorithm for Fast Restoration of Distribution Systems, Compatible with GIS
Power distribution network configuration must be restructured fast after occurring a fault in order to restoring healthy parts. A logical algorithm is needed to do such restoration. In recent years, by developing GIS sys...
Skin lesion classification from dermoscopy images using color and shape features
In this study, a new algorithm for dermoscopy image classification into two types of malignant and benign is presented. At first, one preprocessing step to remove noise and also enhance image quality is performed. After...
Adaptive Coordination of Fuse – Recloser in a Distribution System with High PV Penetration
Employment of photovoltaic (PV) distributed Generation in the distribution system, leads to improvement of network voltage profile and power quality. On the other hand, it cause miscoordination between fuses and recloser...
Adaptive Control of Nonlinear Systems in the presence of Actuator Failures
This paper presents an adaptive state feedback control scheme for a class of nonlinear systems with unknown parameters, variable control gains and in the presence of unknown time varying actuator failures. The designed c...