Design and Simulation of Single-Phase Three-Level, Four-Level and Five-Level Inverter Fed Asynchronous Motor Drive with Diode Clamped Topology
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2014, Vol 12, Issue 1
Abstract
This paper deals with study of single-phase three-level, four-level and five-level inverter fed asynchronous motor drive. Both three-level, four-level and five-level inverters are realized by diode clamped inverter topology. The poor quality of voltage and current of a convectional inverter fed asynchronous motor is due to presence of harmonic contents and hence there is significant level of energy losses. The multilevel inverter is used to reduce the harmonic contents. The inverter with a large number of steps can generate a high quality voltage waveform. The higher inverter levels can be modulated by comparing a sinusoidal reference signal and multiple triangular carrier signals by the means of pulse width modulation technique. The simulation of single-phase three-level, four-level and five-level inverter fed asynchronous motor model is done using 〖MATLAB/SIMULINK〗^R (The math Works, Natick, Massachusetts, USA). The Fast Fourier Transform (FFT) spectrums of the outputs are analyzed to study the reduction in the harmonic contents.
Authors and Affiliations
Gerald Diyike , Aniekan offiong , Daniel Nnadi C
Keywords
Related Articles
- EP ID EP94456
- DOI -
- Views 114
- Downloads 0
Designing of Inset-fed Microstrip Rectangular Patch Antenna for PCS applications
A Rectangular Micristrip Patch antenna with inset fed technique for personal communication services application is presented. The proposed antenna can create resonance at 1.9 GHz. Dielectric material of εr=2.3 and height...
A Review of Black Hole and Worm Hole Attack on AODV Routing Protocol in MANET
The wireless mobile Ad-hoc network (MANET) is self-configuring mobile nodes connected through the wireless links with the decentralized networks where the nodes communicate with each other on the basis of mutual trust. F...
A Study on Region wise Price Variation of Construction Raw Materials using Frequency Analysis through SPSS Software
Materials are at the heart of all branches of engineering. Engineers are better engineers if they have a good understanding of the properties of the materials which they use. The challenge to the engineer is also m...
Design of Low Density Parity Check Decoder for WiMAX and FPGA Realization
Error detection and correction is one of the most important blocks of a communication system. In order to achieve reliable communication over noisy channels with low power consumption, are used for error correction...
High Speed CMOS Comparator Design with 5mV Resolution
A high speed CMOS comparator with low power and high precision is proposed. The topology is very well capable of distinguishing DC voltage difference of around 5mV, which means a high precision circuit. The propo...