Design and Static Stress Analysis of Material Handling Tool Pallet/Skid
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 6
Abstract
In today’s industries, material handling system is unitary of the significant system. The primary application of material handling equipment for storage and shipping of the products. Pallets are used mostly in storing heavy and large items in industries across the globe. Reason for using pallet is to ensure safe material handling and storage of the material. Designing is a field of making a part to be sustained in particular condition. Design of Pallet for crankshafts is designed precisely. If Pallet is not properly designed then it will fail to handling and storage. So that Pallet for crankshaft discussed in this work was designed with conventional CAD design practices having hollow rectangular cross section tubes and then analyzed statically with FEA software having gravitational loading of two crankshaft. The analysis was carried out to determine the induced stresses and deflections at various locations on proposed pallet. The pallet was analyzed by comparing different materials. Also by changing dimensions of tubes and by removing some fault in handling 55% weight is reduced and also cost is reduced by 45%.
Authors and Affiliations
S. R. Ingole, N. K. Chhapkhane, Mr. M. S. Kulkarni
Keywords
Related Articles
- EP ID EP20928
- DOI -
- Views 277
- Downloads 6
Synthetize and Magnetic Properties of Ni Substituted Polycrystalline Zn-spinel Ferrites
The mixed polycrystalline 1 2 4 Ni Zn Fe O s s ferrites where s is the percentage increments of Zn ions, were prepared using the standard double sintering by mixing pure metal oxides NiO , ZnO and 2 3 Fe O . The netmag...
Area efficient DA based Fir filter for EEG Classification
Due to the recent development of digital signal processing algorithms and very large-scale integrated circuit technologies, the initial implementation obstacles of the orthogonal frequency division multiplexing (OFDM) n...
Experimental and Analysis of Aluminum –CU Composite with Different Composition
Copper-aluminum alloy or brass is known for their corrosion resistance. Brasses are stronger and more ductile than red and semi red brasses. They have high wear resistance and low friction coefficient against steel. The...
Experimental Investigation to Study the Effect of the Mineral Oil and Carbide Insert Shapes on Machining of Aisi 4140
There are so many machining parameters, which affects the surface finish of product. One important machining parameter is the shape of the cutting tool and another one is the cutting condition (dry or wet). In this stud...
Vegetable Oil Based Nano Cutting Fluids and its Applications In Reduction Of Tool Wear - A Review
Cutting fluids are mainly employed to increase the machining accuracy and productivity by effectively reducing the heat developed during machining period. Nano cutting fluid applications in metal cutting industries were...