Design and study of protective properties of electromagnetic screens based on iron ore dust
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 5
Abstract
<p>The study of the chemical composition and dispersion of iron ore dust, which forms during the enrichment of iron ore, proved its suitability to be used as a screening filler in the production of metal-polymer electromagnetic screens of large areas. We developed the technology of production of protective screening material in the form of a foam-latex with different content of iron-ore dust of different dispersion. We determined the dependence of the coefficient of screening of material and contribution of the reflection coefficient of ultrahigh frequency electromagnetic waves to it on the weight content of iron ore dust. The study showed that an increase in dispersion of metal and metal-containing particles by 10‒20 times increases the overall screening coefficient by 6‒8 times. At the same time, the reflection coefficient decreases from 0.25 to 0.10. We established that the guaranteed screening coefficient of the magnetic field of the industrial frequency is 1.8‒2.2 even for screening particles of 50‒100 µm sizes. We determined that a sharp increase in protective properties of materials occurs at the content of iron-ore dust of 11‒12 % in the polymer matrix. We investigated electrophysical properties (specific conductivity and dielectric permeability) of developed materials with different contents of metal and metal-containing substance. The obtained data are sufficient for calculational forecasting of protective properties of the electromagnetic screen based on the amplitude-frequency characteristics of the electromagnetic field, which needs to be screened.<em></em></p>
Authors and Affiliations
Valentin Glyva, Sergey Podkopaev, Larysa Levchenko, Nataliia Karaieva, Kyrylo Nikolaiev, Oksana Tykhenko, Oleksiy Khodakovskyy, Batyr Khalmuradov
Keywords
Related Articles
- EP ID EP527759
- DOI 10.15587/1729-4061.2018.123622
- Views 74
- Downloads 0
Study of low-emission multi-component cements with a high content of supplementary cementitious materials
<p>The studies have established the influence of various types of supplementary cementitious materials on physical and mechanical properties and structure formation of low-emission multi-component cements. The results of...
Improvement of cavitation erosion characteristics of the centrifugal inducer stage with the inducer bush
<p>The impact of the inducer bush, which is a stator bush with longitudinal straight grooves installed over the inducer in the model centrifugal stage on its performance, was studied. A physical experiment was performed...
Construction of an algorithm for the selection of rigid stops in steel concrete beams
<p>Calculation of steel-concrete beams is performed with a rigid connection between concrete and a steel strip. This is possible if one installs hard stops that prevent the displacement of the strip with respect to concr...
Construction of a model for the distribution of radial load among the bearing's rolling bodies
<p>We have proposed analytical and computer models related to the distribution of radial load among the rolling bodies in a single-row radial bearing.We have analyzed patternsin the geometry and deformation of parts, as...
Development of a criteriabased approach to agroecological assessment of slope agrolandscapes
<p class="a">For the forecast and management of erosion processes in order to protect the environment, information is needed on the state of its components and impact factors as well as the results of this impact. The ex...