Design and Thermal Analysis of 250cc Engine Cylinder Fin by using Different Materials
Journal Title: GRD Journal for Engineering - Year 2018, Vol 3, Issue 4
Abstract
The 250 cc engine is well-known mechanical component used for power generation, but this is subjected to very high temperature and thermal stresses. Therefore cooling of engine is essential. For this purpose we have two options either we use Liquid cooling system or Air cooling system. Nowadays many of the automotive industries prefers liquid cooling system for higher cc engine but this system have some DRAWBACKS which can be overcome by using Air cooling system(FINS). An air-cooled engine dissipates unwanted heat into surrounding with the help of conduction and convection. We can’t increase conductive heat transfer as it is depends on properties of material used, but we can increase convective heat transfer simply by increasing area; therefore to increase area we use outward projections on cylinder called as fins. The main objective of this project is to design and thermal analysis of 250 cc engine cylinder fins by using different materials to replace liquid cooling system. The main purpose of using this FINS is to cool the 250cc engine cylinder by atmospheric air. But for thermal analysis of cylinder fins analyzing software ANSYS .we have to design whole complex 250 cc engine on designing software which is very difficult so a parametric model of engine cylinder with fins is created in 3D modeling software SOLIDWORKS.
Authors and Affiliations
Akash Patil, Vinit Vikas Sawant, Avinash Vijay Garud, Pratik Suresh Phalke
Keywords
Related Articles
- EP ID EP291619
- DOI -
- Views 90
- Downloads 0
Power Gating Techniques for Nano-Scale Devices
Power consumption is one of the major issues in CMOS technology. ITRS reports that leakage power may dominate the total power consumption. As technology feature size shrinks, the static power dominates the dynamic power...
A Wind Power Generating Electricity by Fast Moving Vehicles
A method for generating electricity using high windd pressure generated by fast moving vehicles channeling the induced wind in the direction of the wind turbine; converting the energy of the wind into mechanical energy b...
Laboratory Evaluation of Potholes Patch Repair Mix with Aggregate and Cationic Type Medium Setting Emulsion as Per IRC 116-2014
Improvement of potholes on streets and roads of India after the onset of storms is a typical marvel. Frequently, potholes are repaired without dated methods, for example, putting soil or exposed aggregate in the pothole...
Diethyl Ether as Additive and its Effect on Diesel Engine Performance – A Review
Increasing demand of fuel day by day its consumption and hazards cause serious intensive attention is required for this problem. Also an Improvement of fuel properties are essential for suppression of pollutant and optim...
A Time Efficient RFID Mutual Authentication Protocol for HealthCare Environments Using Hyper Elliptic curve Cryptosystem
RFID is a transformative technology in the healthcare industry. By applying RFID tags in healthcare environments, for locating and tracking of staff, equipments and patients made easy. However the potential security and...