Design of A Moving Message Dot-Matrix Display Using At89c52 Microcontroller and Decoders
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 6
Abstract
The technique and design of a moving message display DOT-Matrix, used in displaying information to the general public electronically was discussed in this article. In this design a highly efficient microcontroller was used. During the design process involves ATMEL 89C52, 3 to 8-line and 4 to 16-line decoders including a three-state buffer/latch were used as the main hardware component while MIDE was used as software elements.
Authors and Affiliations
Engr. Dr. Okwu P I, Ogungberu Oluwaseyi, Engr Okolo Chidiebere C, Engr Okeke Obinna, Engr. Okoye Ngozi B
Keywords
Related Articles
- EP ID EP24772
- DOI -
- Views 441
- Downloads 15
In Bituminous Concrete Mixes Utilization of Waste Plastic Materials
The constant growth in road traffic couple with an inadequate degree of maintenance due to lack of funds has caused a continuous and accelerated deterioration of the road network. To improve this process, numerouskinds...
Smart Grid Management Using Big Data In Cloud
Smart grid is a technological innovation that improves efficiency, reliability, and sustainability of electricity services. The main challenges of smart grids are how to manage different types of front-end intelligent d...
Light Weight Access Control System for Constrained IOT Devices
This paper presents a low cost and flexib le home control and monitoring system using an embedded micro-web server, with IP connectivity for accessing and controlling devices and appliances remotely using Android based...
Performance of Diesel Engine Using Jatropha and Karanja Biodiesel
Biodiesel is an alternative fuel of diesel, is described as fatty acid methyl ester from vegetable oils or animal fats. The main objectives of the present work is to reduce higher viscosity of Pongamia Pinnata (Karanja)...
U-Slot Microstrip Patch Antenna
The main objective of this paper is to simulate and design a single u-shaped microstrip patch antenna with operating frequency of 5.5GHz. This type of antenna has to be designed using a substrate having a low dielectric...