Design of an Alkaline Fuel Cell
Journal Title: Leonardo Electronic Journal of Practices and Technologies - Year 2006, Vol 5, Issue 9
Abstract
This paper present the design of an alkaline fuel cell operating between 100-250oC. Hydrogen was bubbled into one arm while oxygen into the other. A meter was connected between the electrodes which detects the current flowing through. From the analysis of the results, the input and output of the components were 170kh/hr, the enthalpy of hydrogen and oxygen into the cell are 288.98kJ/hr and 147.06kJ/hr while the enthalpy of potassium carbonate and water leaving the cell are - 1.11·106 kJ/hr and - 9.71 x 105 kJ/hr respectively. Other results are the volume of the cell 303.3/0.30 l/m3, power generated 121W and cost of the fuel cell N 158371.04k.
Authors and Affiliations
Mohammed ALHASSAN
Keywords
Related Articles
- EP ID EP102053
- DOI -
- Views 92
- Downloads 0
Fabrication and Testing of Viscosity Measuring Instrument (Viscometer)
This paper presents the fabrication and testing of a simple and portable viscometer for the measurement of bulk viscosity of different Newtonian fluids. It is aimed at making available the instrument in local markets and...
Ultra low voltage and low power Static Random Access Memory design using average 6.5T technique
Power Stringent Static Random Access Memory (SRAM) design is very much essential in embedded systems such as biomedical implants, automotive electronics and energy harvesting devices in which battery life, input...
The Impact of Pesticide Application on Heavy Metal (Cd, Pb and Cu) Levels in Spinach
The impact of Pesticides (DELVAP 1000EC) application on the levels of Cd, Pb and Cu in two species of Spinach (maroon and green) was investigated. The results shows highest accumulation in leaves compared to stem and roo...
Robust Controller Design for Speed Control of an Indirect Field Oriented Induction Machine Drive
The use of PI controllers for speed control of induction machine drives is characterized by an overshoot during tracking mode and a poor load disturbance rejection. This is mainly caused by the fact that the complexity o...
Binomial Distribution Sample Confidence Intervals Estimation 10. Relative Risk Reduction and RRR-like Expressions
In trial, when the results are reported as dichotomies variables, the most important measure of effect are represented by the relative risk reduction, absolute risk reduction and number needed to treat, providing the bas...