Fabrication and Testing of Viscosity Measuring Instrument (Viscometer)

Journal Title: Leonardo Electronic Journal of Practices and Technologies - Year 2006, Vol 5, Issue 8

Abstract

This paper presents the fabrication and testing of a simple and portable viscometer for the measurement of bulk viscosity of different Newtonian fluids. It is aimed at making available the instrument in local markets and consequently reducing or eliminating the prohibitive cost of importation. The method employed is the use of a D.C motor to rotate a disc having holes for infra-red light to pass through and fall on a photo-diode thus undergoing amplification and this signal being translated on a moving-coil meter as a deflection. The motor speed is kept constant but varies with changes in viscosity of the fluid during stirring, which alter signals being read on the meter. The faster is revolution per minute of the disc, the less the deflection on the meter and vise-versa. From the results of tests conducted on various sample fluids using data on standard Newtonian fluids as reliable guide the efficiency of the viscometer was 76.5%.

Authors and Affiliations

A. HASSAN, M. ABOLARIN, S. MSHELIA

Keywords

Related Articles

Comparative Study of Synthesis Procedures for Urea - Formaldehyde Resins (Part I)

This paper presents initial results from modifying the conventional synthesis procedure of UF resins, that is reacting urea and formaldehyde first in alkaline medium and subsequently in mild acid medium at reflux (conven...

Production of Adhesives from Cassava Starch

The potentials of adhesives production from cassava starch were investigated. Adhesive products from Manihot utilisima and Manihot palmate were compared with a commercial adhesive. Based on the results obtained, equation...

Sliding Controller of Switched Reluctance Motor

This paper presents an application of sliding mode control for switched reluctance motor (SRM) speed. The sliding mode technique finds its stronger justification in the utilization of a robust control law to model uncert...

Electrochemical Studies of Paraquat Adsorbed onto Crystalline Apatite

The carbon paste electrode (CPE) has been used to analyze the electrochemical behavior of paraquat (PQ) adsorbed onto synthesized hydroxyapatite phosphocalcique (HAP) in K2SO4 (0.1M). The cyclic voltammetry results obtai...

Chlorococcalean microalgae Ankistrodesmus convolutes biodiesel characterization with Fourier transform-infrared spectroscopy and gas chromatography mass spectroscopy techniques 

 The Chlorococcalean microalgae Ankistrodesmus convolutes was found in fresh water Godawari reservoir, Ahmednagar district of Maharashtra State, India. Microalgae are modern biomass for the production of liquid bi...

Download PDF file
  • EP ID EP123633
  • DOI -
  • Views 90
  • Downloads 0

How To Cite

A. HASSAN, M. ABOLARIN, S. MSHELIA (2006). Fabrication and Testing of Viscosity Measuring Instrument (Viscometer). Leonardo Electronic Journal of Practices and Technologies, 5(8), 49-57. https://europub.co.uk/articles/-A-123633