Sliding Controller of Switched Reluctance Motor
Journal Title: Leonardo Electronic Journal of Practices and Technologies - Year 2008, Vol 7, Issue 12
Abstract
This paper presents an application of sliding mode control for switched reluctance motor (SRM) speed. The sliding mode technique finds its stronger justification in the utilization of a robust control law to model uncertainties. A sliding mode controller of the motor speed is then designed and simulated. Digital simulation results shows that the designed sliding speed controller realises a good dynamic behaviour of the motor, a perfect speed tracking with no overshoot and a good rejection of impact loads disturbance. The results of applying the sliding mode controller to a SRM give best performances and high robustness than those obtained by the application of a conventional controller (PI).
Authors and Affiliations
Ahmed TAHOUR, Abdelkader MEROUFEL, Hamza ABID, Abdel AISSAOUI
Keywords
Related Articles
- EP ID EP84247
- DOI -
- Views 117
- Downloads 0
Effect of Water Quality on the Performance of Boiler in Nigerian Petroleum Industry
This work investigates quality of water used in boilers of Refinery Company in Nigeria. The results shows that the quality of water fed to boilers are off specification. Low water quality used in boilers led to frequent...
Evaluation of ground level concentration of pollutant due to gas flaring by computer simulation: A case study of Niger - Delta area of Nigeria
The disposal of associated gases through flaring has been a major problem for the Nigerian oil and gas industries and most of theses gases are flared due to the lack of commercial out lets. The resultant effects of gas f...
Design of an Alkaline Fuel Cell
This paper present the design of an alkaline fuel cell operating between 100-250oC. Hydrogen was bubbled into one arm while oxygen into the other. A meter was connected between the electrodes which detects the current f...
Investigating the Effect of Changes in Furnace Operating Conditions Using the Well-Stirred Model
An investigation into the effect of changes in furnace operating conditions employing the application of the ‘well-stirred furnace model’ is presented in this work. The operating conditions considered were the air prehea...
Comparative Study of Synthesis Procedures for Urea - Formaldehyde Resins (Part I)
This paper presents initial results from modifying the conventional synthesis procedure of UF resins, that is reacting urea and formaldehyde first in alkaline medium and subsequently in mild acid medium at reflux (conven...