Design of Explosive Trains of Fuzes
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2015, Vol 6, Issue 2
Abstract
This paper presents the examples of fuze explosive trains designing methods, on the example of 25-mm ammunition fuze. There have been described two, possible to choose, design methods for explosive trains of fuzes. The first method relies on existing solutions using the serial-produced fuzes. The second one is to develop a completely new design explosive train. This paper focuses on the second method of design of explosive trains which can be implemented in two different ways. The first way is very time consuming, long-lasting and needs an experimental work to be done. In this method, we obtained the desired result by „trial and error method”. Second method uses mutually interrelated analytical calculation methods, computer simulations, experiments, and tests. In the case of this explosive train of fuze for 25-mm ammunition, the second method for design was used. As a result of that, the operating principle of explosive train of this fuze and subsequent stages of work on its components was described. The results of experimental tests and live tests on proving ground with the use of 25-mm ammunition was described as well.
Authors and Affiliations
Grzegorz JĄCZEK, Józef GACEK, Eva FRIS
Keywords
Related Articles
- EP ID EP63064
- DOI -
- Views 55
- Downloads 0
Interakcja człowieka ze środowiskiem wirtualnym za pomocą rzeczywistych i wirtualnych elementów sterowniczych
W artykule przedstawiono wnioski z przeprowadzonych badań pozwalających na określenie, która z dwóch metod symulowania wrażenia dotyku ma większy wpływa na realizm i precyzję w interakcji człowieka z rzeczywistymi lub wi...
External Ballistics Simplified Model of the “RT – 400” Rocket Aerial Target
“RT-400” rocket aerial target system is described in the paper; research method of its simplified external ballistics characteristics is presented and the obtained results are discussed. This system was designed, tested,...
Steel-Composite Armour Panels Against RPG with the Use of Nanostructured Bainite-Austenite Steel Plates
Test results of perforation resistance of experimental steel-composite panels containing nanostructured bainite-austenite (NANOS-BA®) steel plates against RPG grenade are presented. Experimental panels were modified in...
Applying AIM-9X on MiG-29 – Initial Analysis of MiG-29 Weapon System Modernizations
Author, in this article, describes technical realizability of assembly AIM-9X missile on MiG-29, gives also in the introduction information about aircraft modernizations necessity. Second and third part of the article co...
Modified Technology for Production of Rocket Engines Bodies
Results of investigation concerning development and application of modern steel products made of maraging grade of higher mechanical properties for production of rocket engines bodies, carried out together by Institute f...