Design of Optimal Filter for Analog Signal
Journal Title: Energy Engineering and Control Systems - Year 2018, Vol 4, Issue 2
Abstract
The technique for designing the optimal value of the filter time constant for analog signal is presented in the paper. This technique is based on the objective function which takes into account the quality index of the filtration process and the dynamic error of the filtered signal. The experimental study of the transient processes in a thermal plant was carried out in order to analyze the influence of the filter parameters on the quality of the filtration process. The optimal value of the filter time constant was designed on the basis of the developed technique for the obtained experimental data. The experimental transient process was compared to the filtered one which was obtained with application of a filter with an optimal time constant. Application of the developed technique for designing the optimal time constant in the automated measurement and control systems will ensure high quality of the filtration process and small dynamic error of the filtered signal.
Authors and Affiliations
Roman Fedoryshyn, Sviatoslav Klos, Volodymyr Savytskyi, Yevhen Pistun, Miroslaw Woloszyn
Keywords
Related Articles
- EP ID EP425220
- DOI 10.23939/jeecs2018.02.093
- Views 68
- Downloads 0
Drying of Antioxidant Composite Materials based on Table Beet
Reduction in the cost of energy in the food industry is an important challenge today due to increased prices. Drying process of plant material refers to the complex energy-intensive processes. Solution of this problem is...
Technique for Evaluating the Uncertainty of Enthalpy of Water and Steam for Thermal Energy Metering Systems
The paper presents an analysis of existing techniques for calculating the enthalpy of water (steam). Based on the analysis the techniques were defined that should be applied for computer-aided design of thermal energy me...
Investigation of Mill Balls Metal Deterioration in Mills KBM 370/850 (Sh-50А) when Fuel not Envisaged in the Mill Design is Used at Thermal Power Plants
Method for determining mill balls metal deterioration rate in a ball mill KBM 370/850 (Sh-50А) of dust-system of coal-dust boilers TPP-210А and TPP-312 300МW of thermal power plants is described in the paper. The researc...
Physical Modeling of Power Unit in Power Plant with Auxiliary Transformer
The article shows the option of the first degree transformation scheme in auxiliary power supply systems of the power unit (PU). The power supply to the auxiliary receivers is carried out from the generator through the w...
Model of Biomineralization of Ferrum Compounds by Gallionella Cells Immobilized on Contact Loading of Bioreactor
In the underground waters not polluted by organic compounds the bivalent iron occurs in the form of hydrocarbonates. An inseparable part of ferrum ions are ferrum bacteria. As a result of the literature review carried ou...