Designe of Multi-Parameter Water Quanlity Sensor
Journal Title: 河南科技大学学报（自然科学版） - Year 2019, Vol 40, Issue 4
Abstract
In order to simplify the transmission line of water quality sensor and improve the measurement accuracy of conductivity and pH parameters, single-core cable structure, six-layer stacking mode and single-end input mode were used to optimize the design. The analysis results show that the single core cable structure transmits data through the power line when supplying DC power for the sensor. The six-layer plate has more excellent and stable noise suppression ability. When using single-ended mode, the working electrode of the p H sensor should to be connected to the high impedance input terminal, and the equipotential point calibration method is adopted to calibrate the pH sensor value.
Authors and Affiliations
Guanghua WEI, Xueliang ZHAO, Kang LI, Qingjia MENG, Shuangbao HAN
Keywords
Related Articles
- EP ID EP553899
- DOI 10.15926/j.cnki.issn1672-6871.2019.04.008
- Views 74
- Downloads 0
Experiment and Microcosmic Mechanism Analysis of Manganese Slag Powder Modified Asphalt Performance
The 35 μm particle size of manganese slag powder was mixed into 70#road petroleum asphalt according to the powder oil ratio of 0%, 3%, 6%, 9%, 12% and 15% to prepare the manganese slag powder asphalt. The test of penetra...
Stress Relaxation Behavior of Al_2O_3/ Cu Dispersion Strengthened Copper Alloy
The stress relaxation behavior of Al_2O_3/Cu dispersion strengthened copper alloy at different temperature( room temperature,100 ℃,200 ℃ and 300 ℃) was studied by the stress relaxation experiment.The test data were fitte...
Optimization of Plug-in Hybrid Electric Vehicle Control Strategy
1
Mechanical Properties Test and Finite Element Analysis of Joints Between Concrete-filled Steel Tubular Special-shaped Columns
In order to study the seismic behavior of joints between new type concrete-filled steel tubular specialshaped columns,the experiment of five joints with 1 /2 scale under low cyclic repeated loading was conducted.The load...
Influence of Initial Water Content on Swelling Characteristics of Bentonite
In order to obtain the influence of initial water content on swelling characteristics of bentonite, the laboratory tests of swelling ratio without pressure, swelling ratio under pressure and swelling force were conducted...