Experiment and Microcosmic Mechanism Analysis of Manganese Slag Powder Modified Asphalt Performance
Journal Title: 河南科技大学学报（自然科学版） - Year 2018, Vol 39, Issue 6
Abstract
The 35 μm particle size of manganese slag powder was mixed into 70#road petroleum asphalt according to the powder oil ratio of 0%, 3%, 6%, 9%, 12% and 15% to prepare the manganese slag powder asphalt. The test of penetration, softening point and ductility were conducted to compare the effect on modified performance of asphalt of different powder oil ration. By X-ray diffraction, infrared spectroscopic analysis, scanning electron microscopy and differential scanning calorimetry, the modified performance and mechanism of manganese slag powder asphalt were explored. The test results show that the high temperature performance of asphalt mixed with the manganese slag powder is improved, while the promotion of low temperature performance is inconspicuous. The temperature sensitivity of asphalt is decreased, and the best powder oil ration is 9%.Atoms such as N, P, S in manganese slag can form weak hydrogen bonds with the atoms unshared electron pairs in asphalt, so the activation of asphalt is enhanced. The Al2 O3 of manganese slag powder adsorbs the micromolecule of aliphatic hydrocarbon and aromatic hydrocarbon in high temperature condition to perform oxidation, crosslinking and condensation reaction. When the high relative molecular mass component increases, the unreacted Al2 O3 is displaced by low relative molecular mass component and continue to play a role as catalytic oxidant. Then the content of high relative molecular mass hydrocarbons increases in asphalt component to improve the performance of asphalt.
Authors and Affiliations
Bin PANG, Bo TAN, Kaokao WAN, Zhiguo GUO, Qiuyi NI
Keywords
Related Articles
- EP ID EP468489
- DOI -
- Views 78
- Downloads 0
Effects of Rutile Particle Size on Microwave Dielectric Properties of Silicone Rubber
Rutile / silicone rubber composites were prepared by filling 107 silicone rubber with micro-and nanorutile particles respectively and by room temperature curing method. The phase composition and microstructure of the cer...
Performance Test of Aluminum Alloy Floor Formwork
The uniform load tests were carried out on a single aluminum alloy floor formwork and a model room composite aluminum alloy floor formwork system respectively, and the contrastive analysis was carried out.When the three...
Stoichiometry Traits in Litter Leaves of Typical Secondary Forest at Karst Regions of Central Guizhou Province
To study the characteristics of nutrient cycling in degraded Karst forest, 10 dominant species in evergreen and deciduous broad-leaved secondary forest from central Guizhou Karst were researched. The chemical stoichiomet...
Preparation of Ternary Bimetal Amorphous Alloy Co-Ni-B and Its Catalytic Hydrolytic Dehydrogenation for Ammonia Borane
Via varying the molar ratio of raw materials and adding different surfactants, a series of ternary bimetal amorphous alloys ( Co-Ni-B) were prepared through a gentle liquid phase reduction route by using CoCl2, NiCl2 and...
Test on Creep Characteristics of Remolded Loess Under High Stress
The high loess-filled embankment in Yan'an area was taken as research object. The high pressure consolidation creep tests were carried out under the control of moisture content and compaction degree. Theeffects of initia...