DETERMINATION OF EFFORTS TO UNLOAD SOIL FROM A SCRAPER BUCKET WITH A SEMICIRCULAR BOTTOM
Journal Title: Вестник Харьковского национального автомобильно-дорожного университета - Year 2014, Vol 65, Issue
Abstract
This article discusses the theoretical analysis of the process of unloading a scraper with a semicircular bottom with forced unloading. The theoretical analysis allows calculating dependence of the soil mass change on the position of the back wall relative to the scraper bottom length and the efforts that are required for unloading.
Authors and Affiliations
L. Khmara, S. Bаev, M. Spilnik
Keywords
Related Articles
- EP ID EP105576
- DOI -
- Views 74
- Downloads 0
GEODETIC BASES FOR IMPROVEMENT OF GEODETIC CONTROL OF LIFTING AND TRANSPORT EQUIPMENT
The theoretical work on the method of determining the deformation of the running wheels of bridge and gantry cranes is presented. The measurement procedure can be performed, both in production and in the manufacture, ins...
DETERMINING THE SIZE OF THE ZONE OF SOIL DEFORMATION BY A CONICAL-CYLINDRICAL TIP AND PRESSURE ON THE LATERAL SURFACE
When forming a horizontal well for trenchless laying of engineering communications by punching the soil with a conical-cylindrical tip, one part of it enters the middle of the pipe for subsequent removal outside, and the...
TIME RESTRICTION ASPECTS IN THE MODELING OF CYBER-PHYSICAL SYSTEMS FOR INDUSTRY 4.0
Cyber-physical systems in Industry 4.0 are comprised of a computational core, a communication core, and a physical system. The computational core has strict timing restrictions and represents a Realtime system. In this p...
ДИАГНОСТИКА СОСУДИСТЫХ РАССТРОЙСТВ У ВОДИТЕЛЕЙ ПАССАЖИРСКОГО АВТОТРАНСПОРТА
Представлены результаты обследования водителей автомобильного транспорта. Сравниваются данные функциональной диагностики, сосудистых нарушений в группах водителей маршрутных автобусов и личного состава МЧС Украины. Проан...
THERMAL CALCULATION OF THE INDUCTION HEATING MODE OF THE SURFACES RESTORED BY ELECTRIC CONTACT SURFACING
Problem. The presence of a heterogeneous structure in the surface layer results in a decrease in the re-sistance of parts operating under conditions of stress concentration. Therefore, the improvement of the operational...