Determination of soil summary pressure on basket walls
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2019, Vol 83, Issue 1
Abstract
The analysis of modern design methods for mounting the pits side indicates the difficulty in predicting the magnitude and distribution of the load on supporting flexible walls. Existing normative methods for calculating supporting structures of foundation pits are generally aimed at ensuring their durability and stability. Using these methods, load on the fence, depending on the strength parameters of the soil, determine shifts, bending moments, transverse and longitudinal forces, and calculate the parameters of the fence it is necessary to ensure the strength of the structure. The necessary depth of its foundation determines the condition of the stability of the fence. The generalization of knowledge in this area, as well as the development of a mathematical model for numerical implementation of the considered problem, will increase the level of rational consolidation of deep pits. In the course of the study, a mathematical model was developed from the following types of mounting: drill piles, tangent drill piles, "Larsen" tufts, monolithic "wall in the ground" in the GeoWall software complex, which is widely used to calculate the strength and stability of supporting walls of foundation pits of different type. According to the results of computer simulation, the largest horizontal deformations are inherent to a type-L4-type tongue mount, which is about 8 cm. The maximum deformation patterns of the drill piles and tangent drill piles are quite similar, respectively; they are 4.1 and 3.9 cm. Therefore, for further the study was adopted as a monolithic "wall in the soil", as the depth of the development of the pit horizontal deformations increase in the range from 0.3 cm to the maximum displacement of 2.6 cm. Maximum vertical displacement of compression is about 0.5 cm.
Authors and Affiliations
V. V. Vapnichna, N. A. Shevchuk
Keywords
Related Articles
- EP ID EP625440
- DOI -
- Views 121
- Downloads 0
Determination of the regularities of formation of the profile error at the grinding of products-shells from brittle non-metallic materials
There are certain requirements to the quality of profile-composite thin-walled shells used in aerospace engineering. All the necessary characteristics of the items (such as thickness, profile accuracy and surface quality...
Compensation of errors and adjusting the position of the gun relative to the target with the compatible rapid movement of the tower and the machine
Instrumentation complexes of weapon stabilizers are used for modernization of the existing and light armored combat vehicles BTR, BMP, BMD and other modifications. They are designed for stabilized guidance and escort in...
Studies of the process of slipping a single car wheel
The article gives the analysis of known researches connected with studying of features of interaction an automobile wheel with loose soil. On the basis of the analysis of the state of study the question of modeling the w...
The influence of siliceous components on the formation of consumer properties of silicate bricks
Siliceous materials at the sand pits in Zhytomyr region are studied in order to obtain the final building product (silicate brick) with durable high performance and low cost. The preliminary studies on the use of sands o...
On the task of building the routes of passenger buses of two automobile companies
The article formulates a mathematical model search of n bus routes between the two points, which carry out cruises corresponding to the specified schedule, and with specified duration. The duration of each route consists...