Determination of Technical and Economic Indicators of Energy Efficient External Frame-Sheathing Walls Using AQUAPANEL®OUTDOOR Plates
Journal Title: Вентиляція, освітлення та теплогазопостачання - Year 2018, Vol 26, Issue
Abstract
When designing external fencing constructions for buildings of various purposes (industrial, residential and public), both thermal and technical characteristics of structures and technical and economic indicators (TEP) play a very important role, which includes the complexity and cost of arranging these structures in different temperature zones. The scope of research was limited to four constructive solutions of prefabricated systems of external walls. The structure of each design included KNAUF cement and mineral plates AQUAPANEL® Cement Board OUTDOOR. The calculations of the resistance of the heat transfer of the prefabricated systems and their respective technical and economic parameters were carried out for a blind wall area of 2.7 m x 6 m with the 400 m step of the stack profile. The determination of the TEP was performed on the basis of preliminary studies of prefabricated systems on the conformity of their heat engineering indicators with the requirements current normative documents. As a result of the conducted research, it was established that for industrial (agricultural) buildings for I and II temperature zones according to the criteria of labor intensity and cost of performance of works the variant with a single-row arrangement of steel profiles Steelco PS 150/278/0,7 without an internal horizontal profile is effective; for residential and public buildings for the I temperature zone, according to the criteria of labor and cost of work, an effective variant with a single-row arrangement of steel profiles Steelco PS 150/278/ 0.7 with an internal horizontal Z-shaped profile Steelco PZu-0,1 80/0,7; for residential and public buildings for the I temperature zone, according to the criteria of labor and cost of work, an effective variant with a single-row arrangement of steel profiles Steelco PS 150/278/0.7 with an internal horizontal Z-shaped profile Steelco PZu-0,1 80/0,7
Authors and Affiliations
D. Khokhriakova, G. Shamrina, E. Dmytrochenkova
Keywords
Related Articles
- EP ID EP556072
- DOI -
- Views 46
- Downloads 0
Analysis and Evaluation of Energy Efficiency Improvement Efforts of the Municipal Heating Systems
Nowadays, municipal heating systems of Ukrainian residential places are the example of inefficient exploitation of the governmental fuel and energy resources. Substitution of the core fuel material – natural gas – with a...
Analysis of velocity profile geometry of laminar flow in a digonal duct
A velocity profile of stabilized laminar flow in digonal duct is analysed. The influence of axes length ratio on the Darcy coefficient is determined. When the ratio decreases the profile takes the saddle-like shape near...
Salt Deposits Destruction Nuder the Influence of Surfactants and the Magnetic Field
The technique and results of experimental studies of the kinetics of destruction of fat and water solutions of penetration process triethanolamine fatty acid esters in capillary-porous body. It determines the optimal flo...
Parameters of a Heat Supply System at a Lower Temperature Chart
In the current Ukrainian economic situation, operation of heat supply systems is under low temperature of the heatingsystem water. The higher temperature chart of 95/70°С is inexpedient because of high cost of fuel. The...
The Heat Flux оf The Condenser іn the Improved System of Exhaust Gas Heat Recovery
The authors show the need to improve the proposed earlier basic version of the system of the heat utilization from the exhaust gases of rotary ovens in the direction of more rational use of the available temperature pote...