Determination of Vibration Characteristics on Vertical Axis of a Four Cylinder Gasoline Engine
Journal Title: International Journal of Automotive Engineering and Technologies - Year 2017, Vol 6, Issue 1
Abstract
The vibration characteristics on the vertical axis of a four cylinder 1.4 L Otto engine was investigated under partial throttle opening rates and different engine speeds, in the study. In the first part of the study, vibration measurements were made in terms of acceleration on the top of engine block. The vibration data were determined at five partial throttle opening rates (10%, 20%, 30%, 40%, and 50%) for four different engine speeds (1400 RPM, 2000 RPM, 3000 RPM and 4000 RPM) in terms of RMS (Root Mean Square) and illustrated with graphs. By using polynomial regression method, the characteristics equations for each throttle opening have been formed. In the second part, the measurements were made by changing engine speeds for each throttle opening and the obtained results were compared with the results obtained from the equations.
Authors and Affiliations
Fatih Cellek| Mechanical Engineering Department, Kırıkkale University, Kırıkkale 71451, Turkey, Hakan Arslan| Mechanical Engineering Department, Kırıkkale University, Kırıkkale 71451, Turkey
Investigation of the Effect of Using Biodiesel Diesel Engine Fuel System Injectors
In this study, currently used as a fuel in diesel engines instead of diesel fuel, biodiesel from renewable energy sources is used, the mass loss due to wear of diesel engines, injectors, injector opening pressure of diam...
Mathematical Model for Fuel Flow Performance of Diesel Engine
In this paper, response surface method (RSM) was proposed to determine fuel flow performance of an internal combustion diesel engine by using different specific conditions (injection pressure, engine speed and throttle p...
Clean Energies Development in Built Environment
The increased availability of reliable and efficient energy services stimulates new development alternatives. This article discusses the potential for such integrated systems in the stationary and portable power market i...
TIG Melted Surface Modified Titanium Alloy for Cylinder Liner Application
Tungsten inert gas (TIG) surface modification with Fe-based alloy can give protection against wear and corrosion of metallic component material. In this study, an attempt has been made to explore deposition of Fe-based a...
Car Seat Comfort by Measuring Interface Pressure and Using Subjective Evaluation System in Road Trials
This study assesses automobile seat comfort by using a subjective evaluation system with road trials and by measuring seat pressure. The focus of this study is to demonstrate how drivers are affected by seat comfort unde...