Determining the effective characteristics of a composite with hollow fiber at longitudinal elongation
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 7
Abstract
<p>When solving problems on the mechanics of composites, it is convenient to use a composite model in the form of a continuous homogeneous medium with effective constants, which adequately reflect its most essential characteristics. Modern engineering and construction commonly use the composites, reinforced with hollow fibers. Unknown for today are the analytical dependences for the effective elastic constants of such composite materials with transtropic components. The task on constructing such dependences is resolved in this paper.</p><p>We have derived analytical dependences for the effective longitudinal modulus of elasticity and the Poisson’s coefficient in the unidirectional fiber composite, consisting of a transtropic matrix and hollow fiber. The composite is simulated by a solid uniform transtropic material. The conditions for a perfect connection are satisfied at the interphase surfaces. In order to obtain the analytical dependences, we have solved two boundary problems: on the longitudinal elongation of a composite cylinder, whose components are the transtropic matrix and hollow fiber, and a solid homogeneous cylinder that models the transtropic composite. The application of conditions for displacements alignment and stresses, found by solving these problems, provided an opportunity to derive formulae for the effective longitudinal modulus of elasticity and Poisson’s coefficient. These formulae reflect the dependences of effective characteristics of a composite on elastic characteristics of the matrix, fibers, and volumetric shares of the fiber and the cavity inside it.</p><p>We have compared results of calculations using the formulae derived with the calculation results based on previously known ratios for the isotropic ratios. This comparison has shown that their relative deviation does not exceed one percent. Application of the obtained dependences makes it possible to design structures with elements made from the composite materials</p>
Authors and Affiliations
Serhii Homeniuk, Sergii Grebenyuk, Mykhailo Klimenko, Anastasia Stoliarova
Aspects of making of a composite material when using red mud
<p class="21">A composite material was developed with the polymeric binder at the elevated concentration of a technogenic raw material, 75 % by weight of red mud, as the filler. Dependence of indicators of composite prop...
Development of the algorithm of reliabilitycentered maintenance of phased array antennas
<p>The strategy and algorithm of reliability-centered maintenance of active phased array antennas are developed. The use of this strategy and algorithm makes it possible to determine the time and volumes of corrective re...
Activation of the nickel foam as a current collector for application in supercapacitors
<p>Nickel foam is widely used as a current collector and as a major component of the faradic electrode in supercapacitors. Activation of nickel foam would allow increasing the capacity of the nickel hydroxide electrode o...
Analysis of conditions for the propagation of internal waves in a threelayer finitedepth liquid
<p>The problem of propagation of internal waves for an ideal incompressible fluid was considered. The hydrodynamic system consisted of three layers of a finite thickness that did not mix and were bounded with a solid cov...
Algorithmizing the methods of basis matrices in the study of balace intersectoral ecological and economic models
<p>Ecological-economic models (such as Leontiev-Ford) play a special role in solving the fundamental problems of long-term planning, taking into account the factor of environmental management. On their basis, the task of...