Development of the method for geometric modeling of S-shaped camber line of the profile of an axial compressor blade
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 1
Abstract
The method for geometric modeling of the S-shaped camber line of the profile of an axial compressor blade, which is a compound curve formed from three sections, was developed. Each of these sections is modeled in the natural parameterization using certain laws of curvature distribution along the arc of the modeled curve. The curvature of the input section obeys the linear law and that of the other two obeys the quadratic law of distribution from the length of the proper arc. Sections are connected with ensuring the second order of smoothness which implies the equality of the values of functions, derivatives, and the curvature at the conjugation point. In contrast to existing methods, it is proposed to plot the camber line of the compressor blade profile directly in the cascade of profiles, for which the axial length, stagger angle and its chord are known. In this case, the geometric angles of flow inlet and outlet are used as source data. Giving the S-shape to the camber line of the blade profile will facilitate multi-gradient motion of working medium at the outlet of the cascade of the profile, and therefore reduce energy losses in a compressor. Based on the proposed method, we developed a software code, which, in addition to digital information on the modeled camber line of the compressor blade profile, also displays the obtained results in a graphical form on the screen of a computer monitor. The performed calculation and experimental studies proved the efficiency of the proposed method for modeling camber lines of the profiles of axial compressor blades. This method can be useful to the organizations involved in designing axial compressors for gas turbine engines
Authors and Affiliations
Valeriy Borisenko, Serhiy Ustenko, Iryna Ustenko
Keywords
Related Articles
- EP ID EP666152
- DOI 10.15587/1729-4061.2019.154270
- Views 79
- Downloads 0
Determining rational parameters of the capacitive energy storage system for the underground railway rolling stock
<p>An approach was proposed for determining rational parameters of the on-board capacitive energy storage for the underground railway rolling stock with recuperation systems. The essence of the approach is to determine t...
Development of methods for structural and logical model unification of metaknowledge for ontologies evolution managing of intelligent systems
<p>The relevance of the study is due to the importance and necessity of unifying the construction and use of intelligent decision support systems for managing complex industrial facilities and systems.</p><p>The aim of t...
Refinement of the mathematical model of frequency converter cable branch with a singlephase short circuit
<p>The mathematical model of the frequency converter cable branch as a part of the mine section power network with a single phase-to-ground fault is clarified. The model takes into account a discrete nature of the output...
Influence of elastic characteristics of raw cotton on the mechanics of feed rollers in the cleaners from small impurities
<p>The effect of the elastic characteristics of raw cotton on the mechanics of the feed rollers in fine impurity cleaners depends on maturity. In cleaners from small impurities, mechanisms are used with spike rollers hav...
Development of the Markovian model for the life cycle of a project’s benefits
<p>This study has improved the standard P5 (Personnel, planet, profit, process, product), which has already been widely applied globally in the practice of project management. However, the standard P5 provides a scheme o...