Developed the Flexure Shear Strength of Rc Beam with Using Fiber Polymer Composite

Abstract

The purpose of this study was to develop the strength in flexure shear of reinforced concrete beam with the help of fiber polymer composites. We use the glass fiber and other polymer matrix as a reinforcement material. The suitability of polymer reinforcement as hard binding material for concrete has been assessed by comparing its ultimate bearing capacity of reinforced concrete beam. We prepare the two set of beam, in set I, we construct three beam, in this 1st beam is normal control beam , and the other two beam are made with fiber reinforcement . As same in set II, three beam are construct, 1st beam is normal and other are made with fiber reinforcement polymer in different way. And compare the result of each beam with each other. The effect of number of GFRP layers and its orientation on ultimate load carrying capacity. The test result indicates that fiber reinforcement polymer can be used effectively used to improve strength of beam.

Authors and Affiliations

Er. Sanjay Sangwan, Er. Naveen Hooda, Er. Deepak Sharma

Keywords

Related Articles

EEG Signal Classification and Drowsiness Detection in Driver

traffic accidents are increasing due to driver’s consumption of alcohol or due to drowsiness. Breathalyzers are used for the purpose of alcohol detection, these device measure the amount of alcohol rather than loss of f...

Light Weight Bricks Using Waste EPS Beads

Demand of construction materials is increasing day by day, Technology has improved a lot in construction techniques of structures. Earlier structures were constructed with heavy materials, but in present time of constru...

Application, Advancements and Research on Drying- A Review

Drying is one of the important operations in the industries like pharmaceutical, fine chemical and food industries. It is always beneficial to dry the product in less time and less area of drying. The drying of the prod...

Stair-Climbing Robot for Rescue Applications

If we want to save our manpower loss there is need in today’s world to place equipments in dangerous areas such as cameras and sensors. Robots are best option in place of manpower to do this task because of which we are...

Comparison of Thermal Characteristics of Simple Boiler with Circulating Fluidized Bed (CFB) Boiler using Thermal Analysis

In this paper, a simple boiler and a CFB boiler are compared for the better thermal characteristics. In general the material used for boiler is steel. But we are replaced with copper and brass. Thermal analysis is done...

Download PDF file
  • EP ID EP18584
  • DOI -
  • Views 879
  • Downloads 23

How To Cite

Er. Sanjay Sangwan, Er. Naveen Hooda, Er. Deepak Sharma (2014). Developed the Flexure Shear Strength of Rc Beam with Using Fiber Polymer Composite. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2(8), -. https://europub.co.uk/articles/-A-18584