Development of a method for estimating the resistance of fibers and threads to a sliding bend based on energy consumption for external and internal friction
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 1
Abstract
<p>We present materials for constructing an instrumental method for assessing resistance of threads to the sliding bend relative to cylindrical surfaces in order to solve tasks on control and prediction of conditions for their processing at minimal cost of production. Underlying the method is the differential accounting of energy consumed to overcome the internal and external friction.</p><p>The main objective of this study was to improve informativeness of the results obtained in the analysis of fires and threads through manifestations of physical- mechanical properties predetermined by patterns in their structure and composition, as well as by characteristics of the streamlined surfaces. It has been proposed to test the thread based on the simulated actual conditions for frictional interaction when bending radius r of the working bodies’ edges should be commensurate with the thickness of the thread. Given such a variant of testing, we have identified conditions that ensure the manifestation of parameters for the internal and external friction, which made it possible to devise a technological scheme of tests and to conduct comparative analyses of threads in materials with different structure and properties.</p><p>We have proposed, as an estimate that characterizes the manifestation of only the external friction at a cylindrical surface of curvature 1/r, the magnitude of energy А<sub>ext. </sub>consumed to displace a thread (of rigidity EI and with a stretched force) under condition 2T(r)<sup>2</sup>/El ≥ 1500. To account for the total energy A due to the external and internal friction, as an estimate that characterizes the resistance of a thread against a sliding bending, the test conditions imply the application of a bending surface with elevated curvature 1/r<sub>1</sub>, that is r<sub>1</sub><<r.</p><p>In order to calculate the estimate D as the proportion of energy А<sub>intern</sub> required to overcome the internal friction, the dependence D=[(А–А<sub>ext.</sub>)/A]·100, %, is used. It has been proposed to perform tests in two stages, each of which implies that a thread, stretched by a constant force, should streamline cylindrical surfaces at an unchanged capture angle, while the radius of the curvature varies at each stage.</p>Effectiveness of the proposed method for assessing resistance against a sliding bend has been confirmed by the results of experiments. We have established a possibility to differentiate the tested threads and yarn based on the magnitude of estimates А<sub>ext </sub>and D under different conditions for interaction with a cylindrical surface. The results obtained allow us to recommend the proposed method for practical implementation, specifically, to control the degree of thread passability through the machine thread-guiding gear
Authors and Affiliations
Evgeny Pashin, Alexander Orlov, Mikhail Volkhonov
Keywords
Related Articles
- EP ID EP528248
- DOI 10.15587/1729-4061.2018.148739
- Views 36
- Downloads 0
Minimizing the mass of a flat bottom of cylindrical apparatus
<p>In the bodies of cylindrical apparatuses that operate under pressure, one of the weak elements is a flat bottom whose thickness is increased by 4…5 times in comparison with the wall thickness. This is due to the fact...
Firmware implementation and experimental research of the phase-locked loop with improved noise immunity
<p>This paper presents a method for improvement of the phase-locked loop (PLL) noise immunity by using a modified phase detector. The article shows structural diagram of the PLL with the modified phase detector and descr...
Development of the concept and method of building of specified project management methodologies
<p class="a"><span lang="EN-US">The article is devoted to solving the scientific problem of formation of the project management metalevel – the level of creation and implementation of project management methodologies (P...
Design of parallel link mobile robot manipulator mechanisms based on function-oriented element base
<p>To create effective mobile robot manipulators, a function-oriented element base is proposed. Element base selection is based on the analysis of schematics of mobile robot manipulators. It is substantiated that the eff...
Method for configuring the composition of a project team based on the criteria of subjective wellbeing
<p>The method for configuring a project team by the criterion of subjective well-being was developed. The method is aimed at searching for such a configuration of candidates at which a team with high commonality is forme...