Development of a new process for expanding stepped tapered rings
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 1
Abstract
A new method for expanding large-size tapered rings with a stepped profile has been considered. The proposed method consists in expanding the blank with the help of a stepped die. A procedure for conducting studies by the method of finite elements was proposed. The procedure is intended to determine dependences of the stress-strain state and shape change during the expanding process by means of a stepped die. Variable parameters included relative height of the stepped blank protrusion which varied in the range of 2.2...2.5. Based on the finite-element modeling, distribution of deformation rate in the forging section after expanding with the help of a stepped die was established. The forging taper formed by expanding in this way was determined. Results of finite-element modeling were verified by experimental studies with lead and steel specimens. A procedure for conducting experimental studies was proposed. The finite-element modeling has allowed us to establish that expanding with the help of a stepped die results in a tapered forging shape. This is explained by the fact that when the wall is reduced, tangential deformation of the annular blank in the wall zone is larger than that in the protrusion zone because of different height of the stepped blank. The results of finite-element modeling were confirmed by experiments in laboratory conditions with lead and steel specimens. Increase in diameter of the blank protrusion leads to an increase in rate of the protrusion deformation which causes an increase in diameter of the protrusion bore. Analysis of macrostructure of the annular forging with a tapered stepped profile has made it possible to establish that when the stepped blank is shaped with the help of a stepped die, metal fibers repeat the target part contour which prevents their cutting during machining. The study has established that expanding of stepped tapered blanks is realizable. It expands technological potentials of the process of expanding large-sized forgings
Authors and Affiliations
Oleg Markov, Oleksiy Gerasimenko, Leila Aliieva, Alexander Shapoval, Maksym Kosilov
Keywords
Related Articles
- EP ID EP666265
- DOI 10.15587/1729-4061.2019.160395
- Views 83
- Downloads 0
Effect of evaporator-condenser diameter ratio (d/D) on thermal performance of the tapering heat pipe with various heat sources
<p class="MDPI17abstract">In the present study, a new tapering heat pipe design had been developed to enhance the thermal performances. Boiling visualization in the tapering heat pipe is investigated to provide the detai...
Generalization of one algorithm for constructing recurrent splines
<p class="a">We have analyzed two algorithms, close in composition, for constructing a smoothing spline, which imply a change only in the last link of the spline when new experimental data arrive. The main feature of the...
Prediction of operability of the plate rolling rolls based on the mixed fracture mechanism
<p>Influence of fracture of the mixed nature on the life of rolls of plate-rolling mills was considered. This is important because the time of trouble-free operation of plate-rolling rolls significantly affects the cost...
Development of the formulation and quality assessment of immunostimulating fresh-mixes with a balanced potassium-protein composition
<p>Using the methods of mathematical modeling, we developed formulations for the immunostimulating fresh-mixes. We determined the percentage of plant raw materials, which corresponds to maximum potassium content in the f...
Calculation of polycondensation equilibria in aqueous solutions of silica and silicates
<p>We proposed some complication of the previously used calculation model to expand capabilities of the theoretical description of acid-base and polycondensation equilibria in water-silicate systems. A fuller account of...