Prediction of operability of the plate rolling rolls based on the mixed fracture mechanism
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 7
Abstract
<p>Influence of fracture of the mixed nature on the life of rolls of plate-rolling mills was considered. This is important because the time of trouble-free operation of plate-rolling rolls significantly affects the cost of the final product. However, there are objective difficulties connected with definition of the optimal model of prediction calculation of the final roll life because there is an insufficient definiteness of influence of the mixed fracture mechanism on the roll life.</p><p>Conventionally, when predicting roll durability, a posteriori models of the roll service life obtained by the methods of mathematical statistics are used. However, the use of such models causes some complexity since preliminary processing of large volumes of statistical information is required. In the framework of the study described in the article, solution to this problem was proposed by determining influence of the mechanism of a mixed fracture on the roll life. This influence indicates the possibility of using the method of survivability curves for estimating the roll durability.</p><p>Thus, an applied aspect of using the obtained scientific result is the possibility of improving the conventional method for calculating the roll service life. This, in turn, makes it possible to optimize previously obtained technological solutions for constructing a diagnostic algorithm of estimating the technical state of the plate-rolling rolls and predicting their residual life.</p>
Authors and Affiliations
Sergey Belodedenko, Alexey Grechany, Andrey Yatsuba
Keywords
Related Articles
- EP ID EP527775
- DOI 10.15587/1729-4061.2018.122818
- Views 43
- Downloads 0
Efficiency of the air heater in a heat recovery system at different thermophysical parameters and operational modes of the boiler
<p class="a">We have examined, for the plate heater included in a heat recovery system of the boiler plant, the influence of its thermophysical parameters on the losses of exergetic power under different operational mode...
Analysis of the influence of the inter-wheel differentials design on the resistance of the car curved motion
<p>The method and results of the analysis of the influence of the inter-wheel differentials design and the corresponding proportionality factors for the additional locking torque on the curved motion resistance of the fo...
Development of a miniature microwave radiothermograph for monitoring the internal brain temperature
<p>To improve efficiency of non-invasive monitoring of the internal brain temperature, a small-size single-channel microwave radiothermograph consisting of a miniature radiometer and a radiometric sensor based on a print...
Development of a technology for interactive design of garments using add-ons of a virtual mannequin
<p>The problem of development of the technology of interactive garment designing by engineering methods was studied, which makes it possible to use the passive mode for automated preparation of design documentation. The...
Determining the most dangerous loading application point for asphalt-concrete layers on a rigid base
<p>Operating conditions of asphalt-concrete layers on cement-concrete slabs differ significantly from other structural solutions. Practical road construction applies the insufficiently developed methods for calculating t...