Development of a selfdiagnostics subsystem of the informationmeasuring system using anfis controllers
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 9
Abstract
<p>A hybrid self-diagnostic system was designed to evaluate correctness of functioning of sensors of the information-measuring system of testing hydraulic transmissions of diesel locomotives of UHP 750 type. The system features the possibility of checking certain four parameters in steady-state operation conditions using known mathematical dependencies. For the other 14 parameters (for which mathematical dependencies were not studied and which have a high complexity of calculations), 14 neural-fuzzy ANFIS networks were developed. Self-diagnostic algorithms using ANFIS controllers were elaborated. The algorithms provide prediction of individual system parameters with the help of ANFIS controllers and a further comparison of the predicted parameters with the measured parameters. The ANFIS controller structure with the proposed Sugeno rule set was constructed and its efficiency was shown.</p><p>Network training and test of the diagnostic subsystem were performed using the data sets obtained in a series of tests of hydraulic transmissions conducted at Promteplovoz diesel locomotive repair plant. The test results have shown that application of the proposed procedure ensures obtaining of correct result of the self-diagnostic subsystem operation.</p>
Authors and Affiliations
Ihor Zhukovyts’kyy
Study of the problem on constructing quadrics at the assigned tangent cones
<p>The research focuses on solving the problems, related to modeling the second-order surfaces (quadrics), the determinant of which includes tangent cones. All research was performed by the paradigm of using constructive...
Development of methods for structural and logical model unification of metaknowledge for ontologies evolution managing of intelligent systems
<p>The relevance of the study is due to the importance and necessity of unifying the construction and use of intelligent decision support systems for managing complex industrial facilities and systems.</p><p>The aim of t...
Designing a combined device for determining the place of arc discharge
<p>We determined factors that arise during an arc discharge and detected possibility of their use to accelerate protection against arc closure. This enables creation of a combined device for accurate determination of an...
Interlaboratory comparisons of the calibration results of time meters
<p>The analysis and selection of the methodology for processing the results of interlaboratory comparisons (IC) were carried out. The universal algorithm for processing the primary IC data was proposed, which allows the...
Development of the method operative calculation the recurrent diagrams for non-regular measurements
<p>Researchers widely use methods for calculation of recurrence plots based on measurement of dynamics of a vector of states in a phase space for visual and quantitative analysis of the behavior of complex dynamic system...