DEVELOPMENT OF EQUIPMENT FOR DISTRIBUTION DEVICES POWER TRACTION ELECTRIC SUPPLY. PART I
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 172, Issue 6
Abstract
It’s presented review of state and development technologies, technical parameters and characteristics modern basic type equipment in the distributive devices for traction power supply systems: complete block technologies, high-voltage switches direct and alternating current, power and converting transformers, switchgears, recuperators and inverters, power supply automation. On example world's leading specimens shows possibilities high energy efficiency and reliability modern equipment for switchgears. Specifics main features and differences, advantages and disadvantages of perspective equipment electric power supply systems are considered. It’s focused view on technical solutions other than those, used in Ukraine, to analyze the feasibility their development and implementation in the present conditions. General directions and criteria for choice rational strategy modernization distributive devices of traction power supply systems are determined. Analysis will allow performing selection technical parameters for devices in design mathematical models and subsequent verification, coordination and implementation in new devices, their compatibility with existing traction power system, railways, subways.
Authors and Affiliations
Sergey Yatsko, Nadia Karpenko, Yaroslav Vashchenko, Vladislav Panchenko
Keywords
Related Articles
- EP ID EP313548
- DOI 10.18664/1994-7852.172.2017.116689
- Views 69
- Downloads 0
THE INFLUENCE OF MULTICOMPONENT ADDITIVES ON EFFECTIVE VISCOSITY OF THE MECHANICALLY ACTIVATED CEMENT SUSPENSIONS
The questions of influence of prescription factors (microsilica, superplasticizer Super PK, polypropylene fiber) on changing of effective viscosity mechanical activated cement containing suspensions that are using in tec...
IMPROVEMENT OF THE PASSENGER ORIENTATION SYSTEM AT RAILWAY STATIONS IN UKRAINE IN CONDITIONS OF INTRODUCING THE SPEED MOVEMENT OF PASSENGER TRAINS
In this work the direction of increasing the efficiency of railway stations Ukraine in the implementation of high-speed passenger trains through improving their systems targeting passengers. Based on the analysis of best...
SIMULATION OF PERFORMANCE OF CIRCULAR CFST COLUMNS UNDER SHORTTIME AND LONG-TIME LOAD
The method of calculation of concrete pipe elements with consideration of physical nonlinearity of materials, geometric nonlinearity of the confinement and the effect of the gain in strength of the core is considered. Th...
INVESTIGATION INTO THE CONDITIONS CAUSING TERMINAL-BOLTED TRACK GAUGE WIDENING AND CONSIDERATION OF IT IN THE CRITICAL GAUGE CALCULATION
In the current regulatory document UZ – Instructions for the device and the content Railways of Ukraine, the largest permissible value of track gauge – 1548mm, which was scientifically proved only for use as a sub-rail b...
APPLICATION OF SYNTHETIC MATERIALS IN QUALITY OF FILTERING IN OIL FILTERS OF HEATING DIESELS
In our time, domestic filtering elements are used in domestic diesel locomotives in oil filters full of current filtration. Having a fairly negative experience in the exploitation of such filter materials, namely, reduci...