Development of fatigue test technology of sheet automobile materials
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 12
Abstract
<p>Ensuring the operability of the cars’ parts and components is one of the most topical problems in the modern automotive industry. Most of the car parts are under cyclic loads leading to materials’ destruction. Therefore, one of the important factors affecting the performance of products is the fatigue strength of the material. In this paper, the existing methods of fatigue tests are analyzed, their advantages and disadvantages are presented. The methodology of fatigue tests of sheet automobile materials was developed. The main idea of this methodology is that it enables to study the fatigue of sheet automobile materials based on single-plane pure bending. This scheme is very close to the conditions of the actual load of car body structural elements. The results of the study of fatigue strength obtained using this methodology allow studying the kinetics of the failure process, fixing the beginning of macrofailure, crack growth rate and, as a consequence, maintainability of the structure.</p><p>Comparative tests enable to determine the material that best meets the operating requirements and provides the reduction of the failure rate of the car metal structures.</p><p>In this paper, important characteristics of fatigue strength were obtained for a number of automobile structural steels 08kp and 20kp: service life to complete failure, fatigue limit, period to fatigue crack nucleation and rate of further propagation and, as a consequence, maintainability of the structure. So, for example, the number of cycles for 08kp steel to complete failure (262,000 cycles) and the period to fatigue crack nucleation (82,000 cycles) is greater, and the rate of further growth (5.38.10-5 mm/cycle) is lower than for 20kp steel (174,000, 68,000 cycles and 8.86.10-5 mm/cycle, correspondingly). Although these parameters were obtained at higher stress (265 MPa) for 08kp steel against only 235 MPa for 20kp steel. This explains the operating advantage of 08kp steel against 20kp steel in the process of car design.</p>The obtained data enable to prevent failure of structural elements and parts under cyclic loads at the stage of car maintenance, and as a consequence, to increase the car operation safety, and to reduce the cost of repair
Authors and Affiliations
German Pachurin, Diana Goncharova, Alexey Filippov, Sofia Shevchenko, Mariia Mukhina, Nikolay Kuzmin, Viktor Pachurin, Yury Matveyev, Lubov Kutepova, Zhanna Smirnova
Keywords
Related Articles
- EP ID EP528236
- DOI 10.15587/1729-4061.2018.144524
- Views 55
- Downloads 0
The results of study into the effect of airsteam blast on the lowgrade fuel gasification process
<p class="a">The design of a highly efficient gas generating plant with a directflow gas generator was proposed for gasification of lowgrade fuels. The design includes a gasair recuperator and an evaporator for prelim...
Principles of construction and identification of a multilevel system for monitoring parameters of technological cycle of casting
<p>For the creation of a multi-level system of integrated control and operational management of physical-chemical and technological casting processes, deterministic causality of technological objects was determined. Thes...
Minimizing the mass of a flat bottom of cylindrical apparatus
<p>In the bodies of cylindrical apparatuses that operate under pressure, one of the weak elements is a flat bottom whose thickness is increased by 4…5 times in comparison with the wall thickness. This is due to the fact...
Modeling the conveyor-modular transfer of multimedia data in a sensor network of transport system
The paper studies the issues of distributed sensor networks interaction based on the Internet of Things architecture in the context of automated control systems design for dynamic objects of transport infrastructure. The...
Application of systems approach at early stages of designinng unmanned towed underwater systems for shallow water areas
<p>Typical configuration of an unmanned towed underwater system (UTUS) was described and advantages of using this type of marine equipment for shallow depth works were outlined.</p><p>A list of basic operating modes of t...