Development of Pneumatic Roving End Opener
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
In a textile mill, different textile wastes are generated in large amount and roving waste is among one of these. In the spinning process, slivers are drawn and twisted into roving by a roving frame. The roving is then wound around roving bobbins by a fly frame. The bobbins are sent to a ring spinning frame and then roving is unwound from the bobbins. During this process, some damaged roving remains on the bobbins as a waste. This roving can be recycled and reused by using roving end opener. The waste roving fibres are opened by using mechanical roving end opener in which beater is used to open the roving but during the opening of roving the fibers get damaged and its quality gets deteriorated. This paper is based on the concept of pneumatic roving end opener whose main advantage is that roving gets opened without damage to the fibres and it will operate on compressed air in mill premises and it requires less maintenance.
Authors and Affiliations
S. R. Kushwah, S. B Naik
Keywords
Related Articles
- EP ID EP672277
- DOI 10.24247/ijmperdoct201980
- Views 105
- Downloads 0
Evaluating Performance and Emissions of CI Engine Run by Blends of Mosambi Peel Methyl Ester and Diesel Fuel
An experimental study is carried out; a mixture of Mosambi peel methyl ester fuels produced from Mosambi peel pyro oil was blended in 10%, 15% and 20 % with Diesel fuel. The Mosambi peel methyl ester and diesel blends we...
EFFECTS OF WATER DIESEL EMULSION ON DIESEL ENGINE
The Water Diesel Emulsion (WiDE) fuel shows nepotism in terms of environmental and economical aspects. In the present investigation, WiDE is used as fuel for the diesel engine. Here, WiDE was prepared with various water...
Experimental Analysis of a Solar Flat Plate Collector for Enhancement in Thermal Performance using Solar Turbulence Generators
Solar air heaters are now-a-days used in space heating as well as a process heating in domestic applications. Since it is a renewable energy conversion device, enhancement of such devices assumes greater significance due...
DESIGN AND FABRICATION OF AUTONOMOUS ROBOT FOR PRECISION AGRICULTURE
Autonomous robots are used for the ease of operation and automating the agricultural sector, which in turn helps in high yield and reduction in labor cost. Automated robots are being used in many of the fields such as Ag...
Design and Efficiency of an Asymmetric Gear
Presently, Gears suffer backlash as well as interference and undercutting. These defects can be eliminated by increasing the pressure angle or by increasing the addendum of the matting gear design for many years. In addi...